A free resource library for information management across the built environment.
Classification
Uniclass 2015 is a unified classification for the UK industry covering all construction sectors.
Definitions
Over 5,700 construction definitions for level of detail and information.
Product data templates
Standardised templates for manufacturers' product information.
Concrete panelled building are described by characteristics such as external walls, internal walls and suspended floors. An example use may be within a panelled or framed structures.
| Reference | Notes | ||
|---|---|---|---|
|
NBS Code |
45-05-60/355 Concrete panelled building |
- |
Complete this electronic spreadsheet to ensure that your Concrete panels product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Requirement
Graphical representation of element, dimensionally inaccurate.
Purpose of information
To provide a visual indication of proposals at a Concept stage identifying key requirements such as access and maintenance zones etc. Information to be suitable for zonal spatial coordination of primary systems / elements.
Requirement
Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.
Purpose of information
To provide a visual representation of proposals, confirming brief for technical Design stage supporting full spatial coordination.
Requirement
Visual information to provide fixed principles of the design supporting procurement. Developed coordination between all professions. Visual representations showing coordination for general size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics. Graphical information represented may alter dependant on visual information to be produced, eg: Scope of work drawings, setting out, floor loading etc Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To provide a visual representation of proposals at a Technical Design stage supporting full spatial coordination.
Requirement
Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.
Complete this electronic spreadsheet to ensure that your Concrete panels product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Concrete panels. | |
| External walls - Panel type | An example value being Precast concrete solid wall and composite wall units. | |
| External walls - Panel thickness | An example value being 100 mm. | |
| External walls - External face - Finish | An example value being Acid etched. | |
| External walls - External face - Texture | The External walls - External face - Texture of the Concrete panels. | |
| External walls - External face - Colour | The External walls - External face - Colour of the Concrete panels. | |
| External walls - Core material | An example value being Mineral wool. | |
| External walls - Internal face finish | An example value being 13 mm gypsum plaster. | |
| Internal walls - Panel type | An example value being Full sandwich. | |
| Internal walls - Panel thickness (overall) | An example value being 75 mm. | |
| Internal walls - Face finish | An example value being Emulsion paint. | |
| Suspended floors - Panel type | An example value being Full sandwich. | |
| Suspended floors - Panel thickness | An example value being 100 mm. | |
| Suspended floors - Upper face finish | An example value being As cast. | |
| Suspended floors - Lower face finish | An example value being Emulsion paint. | |
| Roofs - Panel type | An example value being Full sandwich. | |
| Roofs - Panel thickness | An example value being 100 mm. | |
| Roofs - External face finish | An example value being As cast. | |
| Roofs - Internal face finish | An example value being As supplied. | |
| Integral external components - Doors | The Integral external components - Doors of the Concrete panels. | |
| Integral external components - Windows | The Integral external components - Windows of the Concrete panels. | |
| Integral external components - Stairs and ramps | The Integral external components - Stairs and ramps of the Concrete panels. | |
| Integral external components - Accessories | An example value being Single panic bolt fitted to fire exit door. | |
| Integral internal components - Floor coverings | An example value being Fitted carpet. | |
| Integral internal components - Doors | The Integral internal components - Doors of the Concrete panels. | |
| Integral internal components - Stairs and ramps | The Integral internal components - Stairs and ramps of the Concrete panels. | |
| Integral internal components - Accessories | The Integral internal components - Accessories of the Concrete panels. | |
| Integral trims, skirtings, architraves etc. - Profile | An example value being Ogee. | |
| Integral trims, skirtings, architraves etc. - Material | An example value being Mahogany. | |
| Integral trims, skirtings, architraves etc. - Finish | An example value being Beeswax. | |
| Integral trims, skirtings, architraves etc. - Colour | The Integral trims, skirtings, architraves etc. - Colour of the Concrete panels. | |
| Fittings, furniture and equipment - Fittings | An example value being WC. | |
| Fittings, furniture and equipment - Furniture | An example value being Wardrobe. | |
| Fittings, furniture and equipment - Equipment | An example value being Domestic freezer. | |
| Integral services - Heating | An example value being Electric underfloor. | |
| Integral services - Lighting | An example value being Fluorescent tubes. | |
| Integral services - Communications | An example value being Cabling for power and lighting. | |
| Integral services - Plumbing | An example value being Cold water. | |
| Integral services - Ventilation | An example value being Wall mounted extract fan. | |
| Integral services - Security | An example value being Bell only. | |
| Integral services - Fire alarm | An example value being Automatic with heat sensors. | |
| Integral services - Emergency lighting | An example value being Escape route only. | |
| Integral services - Portable fire extinguishers | An example value being Water filled. | |
| Integral services - Drainage | An example value being Above ground surface water. | |
| Integral services - Service connections | An example value being Hot and cold domestic water. | |
| Integral services - Third party certification | The Integral services - Third party certification of the Concrete panels. | |
| Integral services - Recycled content | The Integral services - Recycled content of the Concrete panels. |
Provide the information specific to the selected manufacturer and product reference. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Concrete panels. | |
| External walls - Panel type | An example value being Precast concrete solid wall and composite wall units. | |
| External walls - Panel thickness | An example value being 100 mm. | |
| External walls - External face - Finish | An example value being Acid etched. | |
| External walls - External face - Texture | The External walls - External face - Texture of the Concrete panels. | |
| External walls - External face - Colour | The External walls - External face - Colour of the Concrete panels. | |
| External walls - Core material | An example value being Mineral wool. | |
| External walls - Internal face finish | An example value being 13 mm gypsum plaster. | |
| Internal walls - Panel type | An example value being Full sandwich. | |
| Internal walls - Panel thickness (overall) | An example value being 75 mm. | |
| Internal walls - Face finish | An example value being Emulsion paint. | |
| Suspended floors - Panel type | An example value being Full sandwich. | |
| Suspended floors - Panel thickness | An example value being 100 mm. | |
| Suspended floors - Upper face finish | An example value being As cast. | |
| Suspended floors - Lower face finish | An example value being Emulsion paint. | |
| Roofs - Panel type | An example value being Full sandwich. | |
| Roofs - Panel thickness | An example value being 100 mm. | |
| Roofs - External face finish | An example value being As cast. | |
| Roofs - Internal face finish | An example value being As supplied. | |
| Integral external components - Doors | The Integral external components - Doors of the Concrete panels. | |
| Integral external components - Windows | The Integral external components - Windows of the Concrete panels. | |
| Integral external components - Stairs and ramps | The Integral external components - Stairs and ramps of the Concrete panels. | |
| Integral external components - Accessories | An example value being Single panic bolt fitted to fire exit door. | |
| Integral internal components - Floor coverings | An example value being Fitted carpet. | |
| Integral internal components - Doors | The Integral internal components - Doors of the Concrete panels. | |
| Integral internal components - Stairs and ramps | The Integral internal components - Stairs and ramps of the Concrete panels. | |
| Integral internal components - Accessories | The Integral internal components - Accessories of the Concrete panels. | |
| Integral trims, skirtings, architraves etc. - Profile | An example value being Ogee. | |
| Integral trims, skirtings, architraves etc. - Material | An example value being Mahogany. | |
| Integral trims, skirtings, architraves etc. - Finish | An example value being Beeswax. | |
| Integral trims, skirtings, architraves etc. - Colour | The Integral trims, skirtings, architraves etc. - Colour of the Concrete panels. | |
| Fittings, furniture and equipment - Fittings | An example value being WC. | |
| Fittings, furniture and equipment - Furniture | An example value being Wardrobe. | |
| Fittings, furniture and equipment - Equipment | An example value being Domestic freezer. | |
| Integral services - Heating | An example value being Electric underfloor. | |
| Integral services - Lighting | An example value being Fluorescent tubes. | |
| Integral services - Communications | An example value being Cabling for power and lighting. | |
| Integral services - Plumbing | An example value being Cold water. | |
| Integral services - Ventilation | An example value being Wall mounted extract fan. | |
| Integral services - Security | An example value being Bell only. | |
| Integral services - Fire alarm | An example value being Automatic with heat sensors. | |
| Integral services - Emergency lighting | An example value being Escape route only. | |
| Integral services - Portable fire extinguishers | An example value being Water filled. | |
| Integral services - Drainage | An example value being Above ground surface water. | |
| Integral services - Service connections | An example value being Hot and cold domestic water. | |
| Integral services - Third party certification | The Integral services - Third party certification of the Concrete panels. | |
| Integral services - Recycled content | The Integral services - Recycled content of the Concrete panels. |
Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.
| Name | Definition | |
|---|---|---|
| Accessibility performance | The accessibility issue(s) which the object satisfies. | |
| Asset type | An indication of whether the object is fixed or movable. | |
| Category | A classification code, e.g. Uniclass2015. | |
| Code performance | The code compliance requirement(s) which the object satisfies | |
| Colour | Characteristic or primary colour of product. | |
| Constituents | Optional constituent features, parts or finishes. | |
| Description | A description of the type of object to detail any design intent. | |
| Duration unit | Duration of expected life (typical value is 'years') | |
| Expected life | The typical service life of the object. | |
| Features | Other important characteristics or features relevant to product specification. | |
| Finish | Characteristic or primary finish of product. | |
| Grade | Standard grading which the product corresponds. | |
| Manufacturer | Email address for the organisation responsible for supplying or manufacturing the object | |
| Material | Characteristic or primary material of product. | |
| Model number | The product, item or unit number assigned by the manufacturer of the object. | |
| Model reference | The name of the object as used by the manufacturer. | |
| Name | A unique human-readable alphanumeric name that begins with the product type. | |
| Nominal height | Typically the vertical or secondary characteristic dimension. | |
| Nominal length | Typically the larger or primary horizontal dimension. | |
| Nominal width | Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension. | |
| Replacement cost | An indicative cost for unit replacement. | |
| Shape | Characteristic shape of product. | |
| Size | Characteristic size of product. | |
| Sustainability performance | Description of the sustainability issue(s) which the object satisfies | |
| Warranty description | Description of the warranty content and any exclusions. | |
| Warranty duration (labour) | Duration of labour warranty. | |
| Warranty duration (parts) | Duration of parts warranty. | |
| Warranty duration unit | Duration of warranties (typical value is 'years'). | |
| Warranty guarantor (labour) | Email address for the organisation responsible for the labour warranty. | |
| Warranty guarantor (parts) | Email address for the organisation responsible for the parts warranty. | |
| Asset identifier | The identification assigned to an asset that enables its differentiation from other assets. | |
| Bar code | The identity of the bar code (or rfid) given to an occurrence of the product (per instance). | |
| Installation date | The date that the manufactured item was installed (per instance). | |
| Serial number | The serial number assigned to an occurrence of a product by the manufacturer (per instance). | |
| Tag number | The tag number assigned to an occurrence of a product by the occupier (per instance). | |
| Warranty start date | The date on which the warranty commences. |
