A free resource library for information management across the built environment.
Classification
Uniclass 2015 is a unified classification for the UK industry covering all construction sectors.
Definitions
Over 5,700 construction definitions for level of detail and information.
Product data templates
Standardised templates for manufacturers' product information.
Precast concrete glazed stair landing panels are described by characteristics such as panel size, nosing and provision for nosing insert. An example use may be within a precast stair tread and landing glazing system.
| Reference | Notes | ||
|---|---|---|---|
|
NBS Code |
45-20-60/370 Precast concrete glazed stair landing panels |
- |
Complete this electronic spreadsheet to ensure that your Concrete glazed stair landing panels product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Requirement
Visual information to provide general principles of the design. Showing arrangement of system with their relationship to internal and external context, and key project criteria to suit a clients brief. General descriptions would be expected to communicate principles of materiality, scope, colour and context. Expect strategic coordination with other professions to show general principles of the design.
Purpose of information
To provide a visual representation of proposals at a Concept stage and support general spatial coordination.
The above illustration is for Glazed floorlight panels from the NBS section Concrete glazing and venting products. This is indicative of the LOD requirements for Concrete glazed stair landing panels.
Requirement
Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.
Purpose of information
To provide a visual representation of proposals, confirming brief for technical Design stage supporting full spatial coordination.
The above illustrations are for Glazed floorlight panels from the NBS section Concrete glazing and venting products. This is indicative of the LOD requirements for Concrete glazed stair landing panels.
Requirement
Information to be updated to reflect 'Final Construction Issue'. All anchors, supports & anti-vibration mounts to be modelled.
Purpose of information
To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.
The above illustrations are for Glazed floorlight panels from the NBS section Concrete glazing and venting products. This is indicative of the LOD requirements for Concrete glazed stair landing panels.
Requirement
Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.
The above illustrations are for Glazed floorlight panels from the NBS section Concrete glazing and venting products. This is indicative of the LOD requirements for Concrete glazed stair landing panels.
Complete this electronic spreadsheet to ensure that your Concrete glazed stair landing panels product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Concrete glazed stair landing panels. | |
| Panel size - Overall size (length x width x depth) | The Panel size - Overall size (length x width x depth) of the Concrete glazed stair landing panels. | |
| Panel size - Clear span | The Panel size - Clear span of the Concrete glazed stair landing panels. | |
| Panel size - Bearing (minimum) | An example value being 75 mm. | |
| Nosing | An example value being 25 mm diameter bullnose. | |
| Provision for nosing insert | The Provision for nosing insert of the Concrete glazed stair landing panels. | |
| Glazing units - Type | An example value being Block. | |
| Glazing units - Standard | An example value being To BS EN 1051-1, class I and. | |
| Glazing units - Form | An example value being A. to BS EN 1051-1. | |
| Face dimensions (l x b, or diameter) | An example value being 93 x 93 mm. | |
| Face dimensions (l x b, or diameter) - Thickness (h) | An example value being 15 mm. | |
| Face dimensions (l x b, or diameter) - Pattern | The Face dimensions (l x b, or diameter) - Pattern of the Concrete glazed stair landing panels. | |
| Face dimensions (l x b, or diameter) - Colour | An example value being Natural. | |
| Face dimensions (l x b, or diameter) - Surface finish | An example value being Manufacturer's recommended slip resistant coating. | |
| Concrete - Type | An example value being Proprietary to BS 8500-1 and BS 8500-2. | |
| Concrete - Conformity | An example value being In accordance with BS 8500-1, Annex A.4 for the specified exposure class and to. | |
| Concrete - Identity | An example value being Manufacturer's mix reference. | |
| Concrete - Exposure class to BS 8500 | An example value being XC1. | |
| Concrete - Colour | An example value being Natural. | |
| Concrete - Wearing surface finish | An example value being Exposed aggregate. | |
| Concrete - Soffit surface finish | An example value being As cast. | |
| Concrete reinforcement - Carbon steel | An example value being To BS 4449, BS 4482, BS 4483 and BS EN 13877-3 as appropriate. | |
| Concrete reinforcement - Cutting and bending | An example value being To BS 8666. | |
| Concrete reinforcement - Condition at time of placement | An example value being Clean, free of corrosive pitting, loose materials and substances that may adversely affect reinforcement, concrete, or bond between the two. | |
| Cast-in lifting sockets | An example value being Two zinc plated steel anchor sockets per panel. | |
| Cast in fixing sockets | An example value being Four zinc plated steel anchor sockets per panel. | |
| Panel accessories | An example value being Stainless steel closure caps to lifting points. |
Provide the information specific to the selected manufacturer and product reference. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Concrete glazed stair landing panels. | |
| Panel size - Overall size (length x width x depth) | The Panel size - Overall size (length x width x depth) of the Concrete glazed stair landing panels. | |
| Panel size - Clear span | The Panel size - Clear span of the Concrete glazed stair landing panels. | |
| Panel size - Bearing (minimum) | An example value being 75 mm. | |
| Nosing | An example value being 25 mm diameter bullnose. | |
| Provision for nosing insert | The Provision for nosing insert of the Concrete glazed stair landing panels. | |
| Glazing units - Type | An example value being Block. | |
| Glazing units - Standard | An example value being To BS EN 1051-1, class I and. | |
| Glazing units - Form | An example value being A. to BS EN 1051-1. | |
| Face dimensions (l x b, or diameter) | An example value being 93 x 93 mm. | |
| Face dimensions (l x b, or diameter) - Thickness (h) | An example value being 15 mm. | |
| Face dimensions (l x b, or diameter) - Pattern | The Face dimensions (l x b, or diameter) - Pattern of the Concrete glazed stair landing panels. | |
| Face dimensions (l x b, or diameter) - Colour | An example value being Natural. | |
| Face dimensions (l x b, or diameter) - Surface finish | An example value being Manufacturer's recommended slip resistant coating. | |
| Concrete - Type | An example value being Proprietary to BS 8500-1 and BS 8500-2. | |
| Concrete - Conformity | An example value being In accordance with BS 8500-1, Annex A.4 for the specified exposure class and to. | |
| Concrete - Identity | An example value being Manufacturer's mix reference. | |
| Concrete - Exposure class to BS 8500 | An example value being XC1. | |
| Concrete - Colour | An example value being Natural. | |
| Concrete - Wearing surface finish | An example value being Exposed aggregate. | |
| Concrete - Soffit surface finish | An example value being As cast. | |
| Concrete reinforcement - Carbon steel | An example value being To BS 4449, BS 4482, BS 4483 and BS EN 13877-3 as appropriate. | |
| Concrete reinforcement - Cutting and bending | An example value being To BS 8666. | |
| Concrete reinforcement - Condition at time of placement | An example value being Clean, free of corrosive pitting, loose materials and substances that may adversely affect reinforcement, concrete, or bond between the two. | |
| Cast-in lifting sockets | An example value being Two zinc plated steel anchor sockets per panel. | |
| Cast in fixing sockets | An example value being Four zinc plated steel anchor sockets per panel. | |
| Panel accessories | An example value being Stainless steel closure caps to lifting points. |
Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.
| Name | Definition | |
|---|---|---|
| Accessibility performance | The accessibility issue(s) which the object satisfies. | |
| Asset type | An indication of whether the object is fixed or movable. | |
| Category | A classification code, e.g. Uniclass2015. | |
| Code performance | The code compliance requirement(s) which the object satisfies | |
| Colour | Characteristic or primary colour of product. | |
| Constituents | Optional constituent features, parts or finishes. | |
| Description | A description of the type of object to detail any design intent. | |
| Duration unit | Duration of expected life (typical value is 'years') | |
| Expected life | The typical service life of the object. | |
| Features | Other important characteristics or features relevant to product specification. | |
| Finish | Characteristic or primary finish of product. | |
| Grade | Standard grading which the product corresponds. | |
| Manufacturer | Email address for the organisation responsible for supplying or manufacturing the object | |
| Material | Characteristic or primary material of product. | |
| Model number | The product, item or unit number assigned by the manufacturer of the object. | |
| Model reference | The name of the object as used by the manufacturer. | |
| Name | A unique human-readable alphanumeric name that begins with the product type. | |
| Nominal height | Typically the vertical or secondary characteristic dimension. | |
| Nominal length | Typically the larger or primary horizontal dimension. | |
| Nominal width | Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension. | |
| Replacement cost | An indicative cost for unit replacement. | |
| Shape | Characteristic shape of product. | |
| Size | Characteristic size of product. | |
| Sustainability performance | Description of the sustainability issue(s) which the object satisfies | |
| Warranty description | Description of the warranty content and any exclusions. | |
| Warranty duration (labour) | Duration of labour warranty. | |
| Warranty duration (parts) | Duration of parts warranty. | |
| Warranty duration unit | Duration of warranties (typical value is 'years'). | |
| Warranty guarantor (labour) | Email address for the organisation responsible for the labour warranty. | |
| Warranty guarantor (parts) | Email address for the organisation responsible for the parts warranty. | |
| Asset identifier | The identification assigned to an asset that enables its differentiation from other assets. | |
| Bar code | The identity of the bar code (or rfid) given to an occurrence of the product (per instance). | |
| Installation date | The date that the manufactured item was installed (per instance). | |
| Serial number | The serial number assigned to an occurrence of a product by the manufacturer (per instance). | |
| Tag number | The tag number assigned to an occurrence of a product by the occupier (per instance). | |
| Warranty start date | The date on which the warranty commences. |
