Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
Name |
Definition |
|
Timber source - General requirements |
An example value being Obtain from well managed forests and/ or plantations. |
|
Timber source - Legality and sustainability |
An example value being Obtained from sources in compliance with the SI: Timber and timber products (placing on the market) regulations. |
|
Timber source - Documentation to be submitted |
An example value being Documentary evidence (which has been or can be independently verified) regarding the provenance of timber supplied. |
|
Certification scheme |
An example value being Forest Stewardship Council (FSC). |
|
Other evidence |
An example value being UK Government timber procurement policy (UKTPP), Category B evidence. |
|
Timing of submissions |
An example value being At tender submission confirm all timber and timber products can be procured in accordance with this specification. |
|
Supplied by |
The Supplied by of the Softwood strips. |
|
Standard |
An example value being Hardwood flooring to BS EN 14342 and. |
|
Third-party certification |
The Third-party certification of the Softwood strips. |
|
VOC emissions |
The VOC emissions of the Softwood strips. |
|
Species |
An example value being Bamboo. |
|
Quality |
The Quality of the Softwood strips. |
|
Appearance class - Hardwood |
An example value being To BS EN 13629, Class Ο. |
|
Appearance class - Softwood |
The Appearance class - Softwood of the Softwood strips. |
|
Moisture content - Hardwood |
An example value being 6–12%. |
|
Moisture content - Softwood |
An example value being 9 ± 2%. |
|
Drying method |
An example value being Kiln-dried. |
|
Finished size - Face width |
An example value being 75 mm. |
|
Finished size - Thickness |
An example value being 14 mm. |
|
Edges |
An example value being Square. |
|
Reaction to fire classification |
The Reaction to fire classification of the Softwood strips. |
|
Finish as delivered - Fire-retardant treatment |
The Finish as delivered - Fire-retardant treatment of the Softwood strips. |
|
Finish as delivered - Slip resistance value – water wet (minimum) |
An example value being To BS 7976-2, PTV of 40. |
|
Finish as delivered - Light reflectance value (LRV) |
The Finish as delivered - Light reflectance value (LRV) of the Softwood strips. |
|
Finish as delivered - Resistance to indentation (minimum) |
An example value being 1000 N. |
|
Finish as delivered - Scratch resistance |
The Finish as delivered - Scratch resistance of the Softwood strips. |
|
Finish as delivered - Applied finish |
An example value being Antique satin. |
|
Accessories |
The Accessories of the Softwood strips. |
|