Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
Name |
Definition |
|
Manufacturer |
The Manufacturer of the Screw classifiers. |
|
Standard |
The Standard of the Screw classifiers. |
|
Component materials |
The Component materials of the Screw classifiers. |
|
Operating temperature range |
The Operating temperature range of the Screw classifiers. |
|
Configuration |
The Configuration of the Screw classifiers. |
|
Durability |
The Durability of the Screw classifiers. |
|
Allowable noise levels at 1m (maximum) |
The Allowable noise levels at 1m (maximum) of the Screw classifiers. |
|
Motor |
The Motor of the Screw classifiers. |
|
Motor - Supply voltage |
The Motor - Supply voltage of the Screw classifiers. |
|
Motor - Nominal frequency |
The Motor - Nominal frequency of the Screw classifiers. |
|
Motor - Direction of rotation |
The Motor - Direction of rotation of the Screw classifiers. |
|
Motor - Mounting arrangements |
The Motor - Mounting arrangements of the Screw classifiers. |
|
Motor - Ingress protection (minimum) |
The Motor - Ingress protection (minimum) of the Screw classifiers. |
|
Influent source |
The Influent source of the Screw classifiers. |
|
Feed arrangements |
The Feed arrangements of the Screw classifiers. |
|
Flow rates |
The Flow rates of the Screw classifiers. |
|
Flow rates - Minimum |
The Flow rates - Minimum of the Screw classifiers. |
|
Flow rates - Design |
The Flow rates - Design of the Screw classifiers. |
|
Flow rates - Maximum |
The Flow rates - Maximum of the Screw classifiers. |
|
Maximum flow events |
The Maximum flow events of the Screw classifiers. |
|
Maximum flow events - Frequency |
The Maximum flow events - Frequency of the Screw classifiers. |
|
Maximum flow events - Duration |
The Maximum flow events - Duration of the Screw classifiers. |
|
Influent grit levels |
The Influent grit levels of the Screw classifiers. |
|
Influent silt levels |
The Influent silt levels of the Screw classifiers. |
|
Type of grit removal equipment installed |
The Type of grit removal equipment installed of the Screw classifiers. |
|
Type of grit transfer equipment installed |
The Type of grit transfer equipment installed of the Screw classifiers. |
|
Split type bearings requirements |
The Split type bearings requirements of the Screw classifiers. |
|
Guarding hinges |
The Guarding hinges of the Screw classifiers. |
|
Screw conveyor |
The Screw conveyor of the Screw classifiers. |
|
Screw conveyor - Type of screw conveyor |
The Screw conveyor - Type of screw conveyor of the Screw classifiers. |
|
Screw conveyor - Material |
The Screw conveyor - Material of the Screw classifiers. |
|
Grit settlement tank |
The Grit settlement tank of the Screw classifiers. |
|
Grit settlement tank - Flange designation |
The Grit settlement tank - Flange designation of the Screw classifiers. |
|
Grit settlement tank - Odour control connection |
The Grit settlement tank - Odour control connection of the Screw classifiers. |
|
Support structures |
The Support structures of the Screw classifiers. |
|
Support structures - Materials |
The Support structures - Materials of the Screw classifiers. |
|
Support structures - Finish |
The Support structures - Finish of the Screw classifiers. |
|