A free resource library for information management across the built environment.
Classification
Uniclass 2015 is a unified classification for the UK industry covering all construction sectors.
Definitions
Over 5,700 construction definitions for level of detail and information.
Product data templates
Standardised templates for manufacturers' product information.
Washer compactor are described by characteristics such as bearings and lubrication, guarding - hinges and mesh viewing panels.
| Reference | Notes | ||
|---|---|---|---|
|
NBS Code |
90-07-90/310 Washer compactor |
- |
Complete this electronic spreadsheet to ensure that your Washer compactors product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Requirement
Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.
Purpose of information
To provide a visual representation of proposals, confirming brief for Technical Design stage supporting full spatial coordination.
The above illustrations are for Screw compactors from the NBS section Wastewater screenings treatment products. This is indicative of the LOD requirements for Washer compactors.
Requirement
Visual information to provide fixed principles of the design supporting procurement. Developed coordination between all professions. Visual representations showing coordination for general size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics. Graphical information represented may alter depending on visual information to be produced, e.g.: Scope of work drawings, setting out, etc. Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To provide a visual representation of proposals at a Technical Design stage supporting full spatial coordination.
The above illustration is for Screw compactors from the NBS section Wastewater screenings treatment products. This is indicative of the LOD requirements for Washer compactors.
Requirement
Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.
The above illustrations are for Screw compactors from the NBS section Wastewater screenings treatment products. This is indicative of the LOD requirements for Washer compactors.
Complete this electronic spreadsheet to ensure that your Washer compactors product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Washer compactors. | |
| Standard | The Standard of the Washer compactors. | |
| Bearings and Lubrication | The Bearings and Lubrication of the Washer compactors. | |
| Bearings and Lubrication - Requirements for split type bearings | The Bearings and Lubrication - Requirements for split type bearings of the Washer compactors. | |
| Bearings and Lubrication - Method of bearing re-greasing | The Bearings and Lubrication - Method of bearing re-greasing of the Washer compactors. | |
| Bearings and Lubrication - Durability of auto grease dispensers | The Bearings and Lubrication - Durability of auto grease dispensers of the Washer compactors. | |
| Guarding - hinges | The Guarding - hinges of the Washer compactors. | |
| Mesh viewing panels | The Mesh viewing panels of the Washer compactors. | |
| Washing and conditioning zone | The Washing and conditioning zone of the Washer compactors. | |
| Washing and conditioning zone - Method of washing and conditioning | The Washing and conditioning zone - Method of washing and conditioning of the Washer compactors. | |
| Washing and conditioning zone - Washwater supply pressure | The Washing and conditioning zone - Washwater supply pressure of the Washer compactors. | |
| Washing and conditioning zone - Washwater flow rate | The Washing and conditioning zone - Washwater flow rate of the Washer compactors. | |
| Washing and conditioning zone - Type of washwater | The Washing and conditioning zone - Type of washwater of the Washer compactors. | |
| Washing and conditioning zone - Valve type | The Washing and conditioning zone - Valve type of the Washer compactors. | |
| Motor | The Motor of the Washer compactors. | |
| Motor - Power | The Motor - Power of the Washer compactors. | |
| Motor - Supply voltage | The Motor - Supply voltage of the Washer compactors. | |
| Motor - Nominal frequency | The Motor - Nominal frequency of the Washer compactors. | |
| Motor - Direction of rotation | The Motor - Direction of rotation of the Washer compactors. | |
| Motor - Output speed requirements | An example value being Fixed. | |
| Motor - Required motor efficiency | The Motor - Required motor efficiency of the Washer compactors. | |
| Motor - Thermal protection | An example value being Required. | |
| Motor - Temperature rise limit | The Motor - Temperature rise limit of the Washer compactors. | |
| Motor - Terminal boxes | The Motor - Terminal boxes of the Washer compactors. | |
| Motor - Terminal boxes - Detachable metal gland plate | An example value being Required. | |
| Motor - Terminal boxes - Cable details | The Motor - Terminal boxes - Cable details of the Washer compactors. | |
| Motor - Anti-condensation heaters voltage | The Motor - Anti-condensation heaters voltage of the Washer compactors. | |
| Motor - Mounting arrangements | The Motor - Mounting arrangements of the Washer compactors. | |
| Motor - Mounting arrangements - Horizontal shaft | An example value being Foot. | |
| Motor - Mounting arrangements - Vertical shaft | An example value being Flange, shaft-down. | |
| Motor - Type of motor protection | The Motor - Type of motor protection of the Washer compactors. | |
| Motor - Gas group | The Motor - Gas group of the Washer compactors. | |
| Motor - Temperature class | The Motor - Temperature class of the Washer compactors. | |
| Motor - Ingress protection (minimum) | The Motor - Ingress protection (minimum) of the Washer compactors. | |
| Transportation zone | The Transportation zone of the Washer compactors. | |
| Transportation zone - Nominal diameter | The Transportation zone - Nominal diameter of the Washer compactors. | |
| Transportation zone - Nominal length | The Transportation zone - Nominal length of the Washer compactors. | |
| Transportation zone - Inclination (degrees from horizontal) | The Transportation zone - Inclination (degrees from horizontal) of the Washer compactors. | |
| Transportation zone - Type of conveyor | The Transportation zone - Type of conveyor of the Washer compactors. | |
| Transportation zone - Brushes | The Transportation zone - Brushes of the Washer compactors. | |
| Compaction zone | The Compaction zone of the Washer compactors. | |
| Compaction zone - Nominal diameter | The Compaction zone - Nominal diameter of the Washer compactors. | |
| Compaction zone - Nominal length | The Compaction zone - Nominal length of the Washer compactors. | |
| Compaction zone - Inclination (degrees from horizontal) | The Compaction zone - Inclination (degrees from horizontal) of the Washer compactors. | |
| Compaction zone - Method of compaction | The Compaction zone - Method of compaction of the Washer compactors. | |
| Materials | The Materials of the Washer compactors. | |
| Materials - Sheet steel components (housing) | The Materials - Sheet steel components (housing) of the Washer compactors. | |
| Materials - Pipework and nozzle | The Materials - Pipework and nozzle of the Washer compactors. | |
| Materials - Screw and spiral | The Materials - Screw and spiral of the Washer compactors. | |
| Materials - Wear plate and liner | The Materials - Wear plate and liner of the Washer compactors. | |
| Materials - Resistance tube | The Materials - Resistance tube of the Washer compactors. | |
| Minimum temperature for frost protection design | The Minimum temperature for frost protection design of the Washer compactors. | |
| Special theft protection measures | The Special theft protection measures of the Washer compactors. | |
| O&M manual specification | The O&M manual specification of the Washer compactors. |
Provide the information specific to the selected manufacturer and product reference. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Washer compactors. | |
| Standard | The Standard of the Washer compactors. | |
| Bearings and Lubrication | The Bearings and Lubrication of the Washer compactors. | |
| Bearings and Lubrication - Requirements for split type bearings | The Bearings and Lubrication - Requirements for split type bearings of the Washer compactors. | |
| Bearings and Lubrication - Method of bearing re-greasing | The Bearings and Lubrication - Method of bearing re-greasing of the Washer compactors. | |
| Bearings and Lubrication - Durability of auto grease dispensers | The Bearings and Lubrication - Durability of auto grease dispensers of the Washer compactors. | |
| Guarding - hinges | The Guarding - hinges of the Washer compactors. | |
| Mesh viewing panels | The Mesh viewing panels of the Washer compactors. | |
| Washing and conditioning zone | The Washing and conditioning zone of the Washer compactors. | |
| Washing and conditioning zone - Method of washing and conditioning | The Washing and conditioning zone - Method of washing and conditioning of the Washer compactors. | |
| Washing and conditioning zone - Washwater supply pressure | The Washing and conditioning zone - Washwater supply pressure of the Washer compactors. | |
| Washing and conditioning zone - Washwater flow rate | The Washing and conditioning zone - Washwater flow rate of the Washer compactors. | |
| Washing and conditioning zone - Type of washwater | The Washing and conditioning zone - Type of washwater of the Washer compactors. | |
| Washing and conditioning zone - Valve type | The Washing and conditioning zone - Valve type of the Washer compactors. | |
| Motor | The Motor of the Washer compactors. | |
| Motor - Power | The Motor - Power of the Washer compactors. | |
| Motor - Supply voltage | The Motor - Supply voltage of the Washer compactors. | |
| Motor - Nominal frequency | The Motor - Nominal frequency of the Washer compactors. | |
| Motor - Direction of rotation | The Motor - Direction of rotation of the Washer compactors. | |
| Motor - Output speed requirements | An example value being Fixed. | |
| Motor - Required motor efficiency | The Motor - Required motor efficiency of the Washer compactors. | |
| Motor - Thermal protection | An example value being Required. | |
| Motor - Temperature rise limit | The Motor - Temperature rise limit of the Washer compactors. | |
| Motor - Terminal boxes | The Motor - Terminal boxes of the Washer compactors. | |
| Motor - Terminal boxes - Detachable metal gland plate | An example value being Required. | |
| Motor - Terminal boxes - Cable details | The Motor - Terminal boxes - Cable details of the Washer compactors. | |
| Motor - Anti-condensation heaters voltage | The Motor - Anti-condensation heaters voltage of the Washer compactors. | |
| Motor - Mounting arrangements | The Motor - Mounting arrangements of the Washer compactors. | |
| Motor - Mounting arrangements - Horizontal shaft | An example value being Foot. | |
| Motor - Mounting arrangements - Vertical shaft | An example value being Flange, shaft-down. | |
| Motor - Type of motor protection | The Motor - Type of motor protection of the Washer compactors. | |
| Motor - Gas group | The Motor - Gas group of the Washer compactors. | |
| Motor - Temperature class | The Motor - Temperature class of the Washer compactors. | |
| Motor - Ingress protection (minimum) | The Motor - Ingress protection (minimum) of the Washer compactors. | |
| Transportation zone | The Transportation zone of the Washer compactors. | |
| Transportation zone - Nominal diameter | The Transportation zone - Nominal diameter of the Washer compactors. | |
| Transportation zone - Nominal length | The Transportation zone - Nominal length of the Washer compactors. | |
| Transportation zone - Inclination (degrees from horizontal) | The Transportation zone - Inclination (degrees from horizontal) of the Washer compactors. | |
| Transportation zone - Type of conveyor | The Transportation zone - Type of conveyor of the Washer compactors. | |
| Transportation zone - Brushes | The Transportation zone - Brushes of the Washer compactors. | |
| Compaction zone | The Compaction zone of the Washer compactors. | |
| Compaction zone - Nominal diameter | The Compaction zone - Nominal diameter of the Washer compactors. | |
| Compaction zone - Nominal length | The Compaction zone - Nominal length of the Washer compactors. | |
| Compaction zone - Inclination (degrees from horizontal) | The Compaction zone - Inclination (degrees from horizontal) of the Washer compactors. | |
| Compaction zone - Method of compaction | The Compaction zone - Method of compaction of the Washer compactors. | |
| Materials | The Materials of the Washer compactors. | |
| Materials - Sheet steel components (housing) | The Materials - Sheet steel components (housing) of the Washer compactors. | |
| Materials - Pipework and nozzle | The Materials - Pipework and nozzle of the Washer compactors. | |
| Materials - Screw and spiral | The Materials - Screw and spiral of the Washer compactors. | |
| Materials - Wear plate and liner | The Materials - Wear plate and liner of the Washer compactors. | |
| Materials - Resistance tube | The Materials - Resistance tube of the Washer compactors. | |
| Minimum temperature for frost protection design | The Minimum temperature for frost protection design of the Washer compactors. | |
| Special theft protection measures | The Special theft protection measures of the Washer compactors. | |
| O&M manual specification | The O&M manual specification of the Washer compactors. |
Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.
| Name | Definition | |
|---|---|---|
| Accessibility performance | The accessibility issue(s) which the object satisfies. | |
| Asset type | An indication of whether the object is fixed or movable. | |
| Category | A classification code, e.g. Uniclass2015. | |
| Code performance | The code compliance requirement(s) which the object satisfies | |
| Colour | Characteristic or primary colour of product. | |
| Constituents | Optional constituent features, parts or finishes. | |
| Description | A description of the type of object to detail any design intent. | |
| Duration unit | Duration of expected life (typical value is 'years') | |
| Expected life | The typical service life of the object. | |
| Features | Other important characteristics or features relevant to product specification. | |
| Finish | Characteristic or primary finish of product. | |
| Grade | Standard grading which the product corresponds. | |
| Manufacturer | Email address for the organisation responsible for supplying or manufacturing the object | |
| Material | Characteristic or primary material of product. | |
| Model number | The product, item or unit number assigned by the manufacturer of the object. | |
| Model reference | The name of the object as used by the manufacturer. | |
| Name | A unique human-readable alphanumeric name that begins with the product type. | |
| Nominal height | Typically the vertical or secondary characteristic dimension. | |
| Nominal length | Typically the larger or primary horizontal dimension. | |
| Nominal width | Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension. | |
| Replacement cost | An indicative cost for unit replacement. | |
| Shape | Characteristic shape of product. | |
| Size | Characteristic size of product. | |
| Sustainability performance | Description of the sustainability issue(s) which the object satisfies | |
| Warranty description | Description of the warranty content and any exclusions. | |
| Warranty duration (labour) | Duration of labour warranty. | |
| Warranty duration (parts) | Duration of parts warranty. | |
| Warranty duration unit | Duration of warranties (typical value is 'years'). | |
| Warranty guarantor (labour) | Email address for the organisation responsible for the labour warranty. | |
| Warranty guarantor (parts) | Email address for the organisation responsible for the parts warranty. | |
| Asset identifier | The identification assigned to an asset that enables its differentiation from other assets. | |
| Bar code | The identity of the bar code (or rfid) given to an occurrence of the product (per instance). | |
| Installation date | The date that the manufactured item was installed (per instance). | |
| Serial number | The serial number assigned to an occurrence of a product by the manufacturer (per instance). | |
| Tag number | The tag number assigned to an occurrence of a product by the occupier (per instance). | |
| Warranty start date | The date on which the warranty commences. |
