Fixed dome cameras

		Reference	Notes
	NBS Code	90-75-10/313 IP fixed dome cameras	-

Level of detail
Level of information

Complete this electronic spreadsheet to ensure that your Fixed dome cameras product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.

Requirement

Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.

Purpose of information

To provide a visual representation of proposals, confirming brief for technical Design stage supporting full spatial coordination.

Plan

Model

The above illustrations are for Analogue box cameras from the NBS section CCTV cameras. This is indicative of the LOD requirements for Fixed dome cameras.

Requirement

Visual information to provide fixed principles of the design supporting procurement. Developed coordination between all professions. Visual representations showing coordination for general size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics. Graphical information represented may alter dependant on visual information to be produced, eg: Scope of work drawings, setting out, floor loading etc Typical / Installation details separately produced linked to model element and adjacent constructions.

Purpose of information

To provide a visual representation of proposals at a Technical Design stage supporting full spatial coordination.

Plan

Elevation

Model

The above illustrations are for Analogue box cameras from the NBS section CCTV cameras. This is indicative of the LOD requirements for Fixed dome cameras.

Requirement

Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.

Purpose of information

To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.

Plan

Elevation

Model

The above illustrations are for Analogue box cameras from the NBS section CCTV cameras. This is indicative of the LOD requirements for Fixed dome cameras.

Manufacturer Product Data template

Provide an outline description of the deliverable.

Name	Definition
Description	A description of the type of object to detail any design intent.

Provide an outline description of the deliverable.

Name	Definition
Description	A description of the type of object to detail any design intent.

Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.

Name	Definition
Manufacturer	The Manufacturer of the Fixed dome cameras.
Image sensor	An example value being 0.25 inch CCD.
Video system	An example value being PAL.
Spectrum	An example value being Colour.
Resolution (minimum)	An example value being 640 x 480.
Minimum illumination	The Minimum illumination of the Fixed dome cameras.
Integrated illumination	An example value being Infrared.
Camera functions - Focus	An example value being Automatic.
Camera functions - Shutter	An example value being Automatic.
Camera functions - Signal to noise ratio (minimum)	An example value being 50 dB with automatic gain control off.
Camera functions - Automatic gain control	An example value being Automatic.
Camera functions - White balance control	An example value being Automatic.
Camera functions - Backlight compensation	An example value being Required.
Camera functions - Wide dynamic range	An example value being On/ Off/ Automatic.
Camera functions - Day/ night mode switching	An example value being Automatic at pre-determined threshold (25 lx).
Camera functions - Audio facility	An example value being Integral one way.
Camera functions - Privacy masks	The Camera functions - Privacy masks of the Fixed dome cameras.
Camera functions - Display type	An example value being On camera multi-language, menu-driven screen display allowing full configuration of camera and through remote monitor and keyboard.
Lens - Format	An example value being Fixed focal length.
Lens - Iris	An example value being Automatic, d.c. drive.
Lens - Focal length	The Lens - Focal length of the Fixed dome cameras.
Lens - Aperture range	The Lens - Aperture range of the Fixed dome cameras.
Lens - Angle of view	The Lens - Angle of view of the Fixed dome cameras.
Video motion detection	An example value being Required.
Power supply	An example value being 12 V d.c.
Telemetry protocol	The Telemetry protocol of the Fixed dome cameras.
Network connectivity	An example value being 10/100BASE-T via RJ-45.
Network protocols	The Network protocols of the Fixed dome cameras.
Video compression formats	An example value being H.264.
Video streaming	An example value being Dual.
Integral memory storage (minimum)	An example value being 8 GB.
Alarm inputs	The Alarm inputs of the Fixed dome cameras.
Alarm outputs	The Alarm outputs of the Fixed dome cameras.
Camera housing - Ingress protection (minimum)	An example value being To BS EN 60529, IP66.
Camera housing - Impact protection (minimum)	An example value being To BS EN 62262, IK08.
Camera housing - Environmental classification	An example value being To BS EN 62676-1-1, Class I.
Camera housing - Housing colour	An example value being Black.
Camera housing - Dome colour	An example value being Smoked.
Accessories	An example value being Ceiling bracket.

Provide the information specific to the selected manufacturer and product reference. Information covering the execution of the deliverable should also be provided in the associated specification.

Name	Definition
Manufacturer	The Manufacturer of the Fixed dome cameras.
Image sensor	An example value being 0.25 inch CCD.
Video system	An example value being PAL.
Spectrum	An example value being Colour.
Resolution (minimum)	An example value being 640 x 480.
Minimum illumination	The Minimum illumination of the Fixed dome cameras.
Integrated illumination	An example value being Infrared.
Camera functions - Focus	An example value being Automatic.
Camera functions - Shutter	An example value being Automatic.
Camera functions - Signal to noise ratio (minimum)	An example value being 50 dB with automatic gain control off.
Camera functions - Automatic gain control	An example value being Automatic.
Camera functions - White balance control	An example value being Automatic.
Camera functions - Backlight compensation	An example value being Required.
Camera functions - Wide dynamic range	An example value being On/ Off/ Automatic.
Camera functions - Day/ night mode switching	An example value being Automatic at pre-determined threshold (25 lx).
Camera functions - Audio facility	An example value being Integral one way.
Camera functions - Privacy masks	The Camera functions - Privacy masks of the Fixed dome cameras.
Camera functions - Display type	An example value being On camera multi-language, menu-driven screen display allowing full configuration of camera and through remote monitor and keyboard.
Lens - Format	An example value being Fixed focal length.
Lens - Iris	An example value being Automatic, d.c. drive.
Lens - Focal length	The Lens - Focal length of the Fixed dome cameras.
Lens - Aperture range	The Lens - Aperture range of the Fixed dome cameras.
Lens - Angle of view	The Lens - Angle of view of the Fixed dome cameras.
Video motion detection	An example value being Required.
Power supply	An example value being 12 V d.c.
Telemetry protocol	The Telemetry protocol of the Fixed dome cameras.
Network connectivity	An example value being 10/100BASE-T via RJ-45.
Network protocols	The Network protocols of the Fixed dome cameras.
Video compression formats	An example value being H.264.
Video streaming	An example value being Dual.
Integral memory storage (minimum)	An example value being 8 GB.
Alarm inputs	The Alarm inputs of the Fixed dome cameras.
Alarm outputs	The Alarm outputs of the Fixed dome cameras.
Camera housing - Ingress protection (minimum)	An example value being To BS EN 60529, IP66.
Camera housing - Impact protection (minimum)	An example value being To BS EN 62262, IK08.
Camera housing - Environmental classification	An example value being To BS EN 62676-1-1, Class I.
Camera housing - Housing colour	An example value being Black.
Camera housing - Dome colour	An example value being Smoked.
Accessories	An example value being Ceiling bracket.

Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.

Name	Definition
Accessibility performance	The accessibility issue(s) which the object satisfies.
Asset type	An indication of whether the object is fixed or movable.
Category	A classification code, e.g. Uniclass2015.
Code performance	The code compliance requirement(s) which the object satisfies
Colour	Characteristic or primary colour of product.
Constituents	Optional constituent features, parts or finishes.
Description	A description of the type of object to detail any design intent.
Duration unit	Duration of expected life (typical value is 'years')
Expected life	The typical service life of the object.
Features	Other important characteristics or features relevant to product specification.
Finish	Characteristic or primary finish of product.
Grade	Standard grading which the product corresponds.
Manufacturer	Email address for the organisation responsible for supplying or manufacturing the object
Material	Characteristic or primary material of product.
Model number	The product, item or unit number assigned by the manufacturer of the object.
Model reference	The name of the object as used by the manufacturer.
Name	A unique human-readable alphanumeric name that begins with the product type.
Nominal height	Typically the vertical or secondary characteristic dimension.
Nominal length	Typically the larger or primary horizontal dimension.
Nominal width	Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension.
Replacement cost	An indicative cost for unit replacement.
Shape	Characteristic shape of product.
Size	Characteristic size of product.
Sustainability performance	Description of the sustainability issue(s) which the object satisfies
Warranty description	Description of the warranty content and any exclusions.
Warranty duration (labour)	Duration of labour warranty.
Warranty duration (parts)	Duration of parts warranty.
Warranty duration unit	Duration of warranties (typical value is 'years').
Warranty guarantor (labour)	Email address for the organisation responsible for the labour warranty.
Warranty guarantor (parts)	Email address for the organisation responsible for the parts warranty.
Asset identifier	The identification assigned to an asset that enables its differentiation from other assets.
Bar code	The identity of the bar code (or rfid) given to an occurrence of the product (per instance).
Installation date	The date that the manufactured item was installed (per instance).
Serial number	The serial number assigned to an occurrence of a product by the manufacturer (per instance).
Tag number	The tag number assigned to an occurrence of a product by the occupier (per instance).
Warranty start date	The date on which the warranty commences.

Related literature

BIM Toolkit

NBS