Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
Name |
Definition |
|
Manufacturer |
The Manufacturer of the Back pull-out end suction pumps. |
|
Standard |
The Standard of the Back pull-out end suction pumps. |
|
Pump unit application |
The Pump unit application of the Back pull-out end suction pumps. |
|
Mode of operation |
The Mode of operation of the Back pull-out end suction pumps. |
|
Type of drive |
The Type of drive of the Back pull-out end suction pumps. |
|
Durability |
The Durability of the Back pull-out end suction pumps. |
|
Utilisation |
The Utilisation of the Back pull-out end suction pumps. |
|
Operating speed (maximum) |
The Operating speed (maximum) of the Back pull-out end suction pumps. |
|
Hydraulic performance at the Guarantee point at N2 |
The Hydraulic performance at the Guarantee point at N2 of the Back pull-out end suction pumps. |
|
Hydraulic performance at the Guarantee point at N2 - Flow rate |
The Hydraulic performance at the Guarantee point at N2 - Flow rate of the Back pull-out end suction pumps. |
|
Hydraulic performance at the Guarantee point at N2 - Static head |
The Hydraulic performance at the Guarantee point at N2 - Static head of the Back pull-out end suction pumps. |
|
Hydraulic performance at the Guarantee point at N2 - Dynamic head (station) |
The Hydraulic performance at the Guarantee point at N2 - Dynamic head (station) of the Back pull-out end suction pumps. |
|
Hydraulic performance at the Guarantee point at N2 - Dynamic head (main) |
The Hydraulic performance at the Guarantee point at N2 - Dynamic head (main) of the Back pull-out end suction pumps. |
|
Variable speed pumping duties |
The Variable speed pumping duties of the Back pull-out end suction pumps. |
|
Variable speed pumping duties - Flow rate (minimum) |
The Variable speed pumping duties - Flow rate (minimum) of the Back pull-out end suction pumps. |
|
Variable speed pumping duties - Flow rate (maximum) |
The Variable speed pumping duties - Flow rate (maximum) of the Back pull-out end suction pumps. |
|
Variable speed pumping duties - Inverter output frequency (maximum) |
The Variable speed pumping duties - Inverter output frequency (maximum) of the Back pull-out end suction pumps. |
|
System data |
The System data of the Back pull-out end suction pumps. |
|
System data - Reference for data/curve |
The System data - Reference for data/curve of the Back pull-out end suction pumps. |
|
System data - Static head (minimum) |
The System data - Static head (minimum) of the Back pull-out end suction pumps. |
|
System data - Static head (maximum) |
The System data - Static head (maximum) of the Back pull-out end suction pumps. |
|
Pump curve number |
The Pump curve number of the Back pull-out end suction pumps. |
|
Q(guarantee point)/Q(best efficiency point) at N2 |
The Q(guarantee point)/Q(best efficiency point) at N2 of the Back pull-out end suction pumps. |
|
Q(guarantee point)/Q(best efficiency point) at N2 - Upper limit |
The Q(guarantee point)/Q(best efficiency point) at N2 - Upper limit of the Back pull-out end suction pumps. |
|
Q(guarantee point)/Q(best efficiency point) at N2 - Lower limit |
The Q(guarantee point)/Q(best efficiency point) at N2 - Lower limit of the Back pull-out end suction pumps. |
|
Pump efficiency at N2 |
The Pump efficiency at N2 of the Back pull-out end suction pumps. |
|
Pump efficiency at N2 - At the guarantee point |
The Pump efficiency at N2 - At the guarantee point of the Back pull-out end suction pumps. |
|
Pump efficiency at N2 - At the maximum flow |
The Pump efficiency at N2 - At the maximum flow of the Back pull-out end suction pumps. |
|
Pump power input at N2 |
The Pump power input at N2 of the Back pull-out end suction pumps. |
|
Pump power input at N2 - At the guarantee point |
The Pump power input at N2 - At the guarantee point of the Back pull-out end suction pumps. |
|
Pump power input at N2 - At the maximum flow |
The Pump power input at N2 - At the maximum flow of the Back pull-out end suction pumps. |
|
Pump power input at N2 - Maximum |
The Pump power input at N2 - Maximum of the Back pull-out end suction pumps. |
|
Flow rate at N2 (maximum) |
The Flow rate at N2 (maximum) of the Back pull-out end suction pumps. |
|
Flow rate at N2 (minimum) |
The Flow rate at N2 (minimum) of the Back pull-out end suction pumps. |
|
Pump unit to be capable of discharging into an empty main |
The Pump unit to be capable of discharging into an empty main of the Back pull-out end suction pumps. |
|
Performance at closed valve at N2 |
The Performance at closed valve at N2 of the Back pull-out end suction pumps. |
|
Performance at closed valve at N2 - Head |
The Performance at closed valve at N2 - Head of the Back pull-out end suction pumps. |
|
Performance at closed valve at N2 - Operating time (maximum) |
The Performance at closed valve at N2 - Operating time (maximum) of the Back pull-out end suction pumps. |
|
Net positive suction head available at N2 |
The Net positive suction head available at N2 of the Back pull-out end suction pumps. |
|
Net positive suction head available at N2 - At the guarantee point |
The Net positive suction head available at N2 - At the guarantee point of the Back pull-out end suction pumps. |
|
Net positive suction head available at N2 - At the maximum flow |
The Net positive suction head available at N2 - At the maximum flow of the Back pull-out end suction pumps. |
|
Net positive suction head required at N2 |
The Net positive suction head required at N2 of the Back pull-out end suction pumps. |
|
Net positive suction head required at N2 - At the guarantee point |
The Net positive suction head required at N2 - At the guarantee point of the Back pull-out end suction pumps. |
|
Net positive suction head required at N2 - At the maximum flow |
The Net positive suction head required at N2 - At the maximum flow of the Back pull-out end suction pumps. |
|
Net positive suction head required at N2 - Net positive suction head safety margin at the maximum flow |
The Net positive suction head required at N2 - Net positive suction head safety margin at the maximum flow of the Back pull-out end suction pumps. |
|
Expected noise levels at the guarantee point (dB at 1m) |
The Expected noise levels at the guarantee point (dB at 1m) of the Back pull-out end suction pumps. |
|
Expected RMS vibration velocity levels |
The Expected RMS vibration velocity levels of the Back pull-out end suction pumps. |
|
Pump unit design standard |
An example value being To BS EN 733. |
|
External corrosion protection specification |
The External corrosion protection specification of the Back pull-out end suction pumps. |
|
Mounting arrangements |
The Mounting arrangements of the Back pull-out end suction pumps. |
|
Mounting arrangements - Orientation |
The Mounting arrangements - Orientation of the Back pull-out end suction pumps. |
|
Mounting arrangements - Mounting arrangements |
An example value being Close coupled. |
|
Pump casing |
The Pump casing of the Back pull-out end suction pumps. |
|
Pump casing - Material |
The Pump casing - Material of the Back pull-out end suction pumps. |
|
Pump casing - Inlet connections |
The Pump casing - Inlet connections of the Back pull-out end suction pumps. |
|
Pump casing - Inlet connections - Nominal bore |
The Pump casing - Inlet connections - Nominal bore of the Back pull-out end suction pumps. |
|
Pump casing - Inlet connections - Flange type |
The Pump casing - Inlet connections - Flange type of the Back pull-out end suction pumps. |
|
Pump casing - Outlet connections |
The Pump casing - Outlet connections of the Back pull-out end suction pumps. |
|
Pump casing - Outlet connections - Nominal bore |
The Pump casing - Outlet connections - Nominal bore of the Back pull-out end suction pumps. |
|
Pump casing - Outlet connections - Flange type |
The Pump casing - Outlet connections - Flange type of the Back pull-out end suction pumps. |
|
Pump casing - Renewable wear parts |
The Pump casing - Renewable wear parts of the Back pull-out end suction pumps. |
|
Pump casing - Internal coatings |
The Pump casing - Internal coatings of the Back pull-out end suction pumps. |
|
Pump casing - Internal coatings - Specification |
The Pump casing - Internal coatings - Specification of the Back pull-out end suction pumps. |
|
Pump casing - Internal coatings - Thickness |
The Pump casing - Internal coatings - Thickness of the Back pull-out end suction pumps. |
|
Pump casing - Internal coatings - Efficiency increase |
The Pump casing - Internal coatings - Efficiency increase of the Back pull-out end suction pumps. |
|
Pump casing - Internal coatings - Durability |
The Pump casing - Internal coatings - Durability of the Back pull-out end suction pumps. |
|
Pump casing - Size of connections |
The Pump casing - Size of connections of the Back pull-out end suction pumps. |
|
Pump casing - Size of connections - Inlet and outlet pressure gauges |
The Pump casing - Size of connections - Inlet and outlet pressure gauges of the Back pull-out end suction pumps. |
|
Pump casing - Size of connections - Venting pipework |
The Pump casing - Size of connections - Venting pipework of the Back pull-out end suction pumps. |
|
Pump casing - Size of connections - Drain pipework |
The Pump casing - Size of connections - Drain pipework of the Back pull-out end suction pumps. |
|
Pump casing - Size of connections - Seal flushing pipework |
The Pump casing - Size of connections - Seal flushing pipework of the Back pull-out end suction pumps. |
|
Impeller |
The Impeller of the Back pull-out end suction pumps. |
|
Impeller - Type of impeller |
An example value being Closed. |
|
Impeller - Material |
The Impeller - Material of the Back pull-out end suction pumps. |
|
Impeller - Direction of rotation of impeller (viewed from the non-drive end) |
The Impeller - Direction of rotation of impeller (viewed from the non-drive end) of the Back pull-out end suction pumps. |
|
Impeller - Impeller dimensions |
The Impeller - Impeller dimensions of the Back pull-out end suction pumps. |
|
Impeller - Impeller dimensions - Actual diameter fitted |
The Impeller - Impeller dimensions - Actual diameter fitted of the Back pull-out end suction pumps. |
|
Impeller - Impeller dimensions - Diameter (maximum) |
The Impeller - Impeller dimensions - Diameter (maximum) of the Back pull-out end suction pumps. |
|
Impeller - Method of securing impeller to pump shaft |
An example value being Key. |
|
Impeller - Wear rings |
The Impeller - Wear rings of the Back pull-out end suction pumps. |
|
Impeller - Machining allowance |
The Impeller - Machining allowance of the Back pull-out end suction pumps. |
|
Pump shaft material |
The Pump shaft material of the Back pull-out end suction pumps. |
|
Shaft sleeve material |
The Shaft sleeve material of the Back pull-out end suction pumps. |
|
Pump shaft seals |
The Pump shaft seals of the Back pull-out end suction pumps. |
|
Pump shaft seals - Seal details |
An example value being Mechanical. |
|
Pump shaft seals - Seal details - Manufacturer |
The Pump shaft seals - Seal details - Manufacturer of the Back pull-out end suction pumps. |
|
Pump shaft seals - Seal details - Designation |
The Pump shaft seals - Seal details - Designation of the Back pull-out end suction pumps. |
|
Pump shaft seals - Seal flushing and cooling |
The Pump shaft seals - Seal flushing and cooling of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal |
The Pump shaft seals - Mechanical seal of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal - Type of mechanical seal |
The Pump shaft seals - Mechanical seal - Type of mechanical seal of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal - Seal cover plate material |
The Pump shaft seals - Mechanical seal - Seal cover plate material of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal - Throttle bush material |
The Pump shaft seals - Mechanical seal - Throttle bush material of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal - Rotating ring material |
The Pump shaft seals - Mechanical seal - Rotating ring material of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal - Stationary ring material |
The Pump shaft seals - Mechanical seal - Stationary ring material of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal - Secondary seals material |
The Pump shaft seals - Mechanical seal - Secondary seals material of the Back pull-out end suction pumps. |
|
Pump shaft seals - Mechanical seal - Spring material |
The Pump shaft seals - Mechanical seal - Spring material of the Back pull-out end suction pumps. |
|
Pump shaft seals - Packed gland seal component materials |
The Pump shaft seals - Packed gland seal component materials of the Back pull-out end suction pumps. |
|
Pump shaft seals - Packed gland seal component materials - Gland follower |
The Pump shaft seals - Packed gland seal component materials - Gland follower of the Back pull-out end suction pumps. |
|
Pump shaft seals - Packed gland seal component materials - Packing |
The Pump shaft seals - Packed gland seal component materials - Packing of the Back pull-out end suction pumps. |
|
Pump shaft seals - Packed gland seal component materials - Lantern ring |
The Pump shaft seals - Packed gland seal component materials - Lantern ring of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication |
The Bearings and bearing lubrication of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - L10h durability at the GP (minimum) |
The Bearings and bearing lubrication - L10h durability at the GP (minimum) of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - Bearing details |
The Bearings and bearing lubrication - Bearing details of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - Bearing details - Manufacturer |
The Bearings and bearing lubrication - Bearing details - Manufacturer of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - Bearing details - Designation |
The Bearings and bearing lubrication - Bearing details - Designation of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - Lubrication method |
An example value being Sealed for life. |
|
Bearings and bearing lubrication - Bearing lubricant |
The Bearings and bearing lubrication - Bearing lubricant of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - Bearing lubricant - Type of bearing lubricant |
The Bearings and bearing lubrication - Bearing lubricant - Type of bearing lubricant of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - Bearing lubricant - Grade |
The Bearings and bearing lubrication - Bearing lubricant - Grade of the Back pull-out end suction pumps. |
|
Bearings and bearing lubrication - Grease dispenser type |
An example value being Replaceable. |
|
Bearings and bearing lubrication - Capacity of lubricators |
The Bearings and bearing lubrication - Capacity of lubricators of the Back pull-out end suction pumps. |
|
Coupling |
The Coupling of the Back pull-out end suction pumps. |
|
Coupling - Type of coupling |
The Coupling - Type of coupling of the Back pull-out end suction pumps. |
|
Coupling - Manufacturer |
The Coupling - Manufacturer of the Back pull-out end suction pumps. |
|
Coupling - Spacer coupling |
The Coupling - Spacer coupling of the Back pull-out end suction pumps. |
|
Coupling - Component materials |
The Coupling - Component materials of the Back pull-out end suction pumps. |
|
Coupling - Component materials - Hub |
The Coupling - Component materials - Hub of the Back pull-out end suction pumps. |
|
Coupling - Component materials - Spacer |
The Coupling - Component materials - Spacer of the Back pull-out end suction pumps. |
|
Coupling - Component materials - Flexible component |
The Coupling - Component materials - Flexible component of the Back pull-out end suction pumps. |
|
Coupling - Component materials - Guard |
The Coupling - Component materials - Guard of the Back pull-out end suction pumps. |
|
Coupling - Coupling service factor |
The Coupling - Coupling service factor of the Back pull-out end suction pumps. |
|
Motor |
The Motor of the Back pull-out end suction pumps. |
|
Motor - Supply voltage |
The Motor - Supply voltage of the Back pull-out end suction pumps. |
|
Motor - Nominal frequency |
The Motor - Nominal frequency of the Back pull-out end suction pumps. |
|
Condition monitoring and protection sensors |
The Condition monitoring and protection sensors of the Back pull-out end suction pumps. |
|
Condition monitoring and protection sensors - Type of sensors required |
An example value being Bearing temperature. |
|
Condition monitoring and protection sensors - Fixing arrangements |
The Condition monitoring and protection sensors - Fixing arrangements of the Back pull-out end suction pumps. |
|
O & M manuals type |
An example value being Suppliers standard. |
|