A free resource library for information management across the built environment.
Classification
Uniclass 2015 is a unified classification for the UK industry covering all construction sectors.
Definitions
Over 5,700 construction definitions for level of detail and information.
Product data templates
Standardised templates for manufacturers' product information.
Solids handling pump unit are described by characteristics such as pump unit application, durability and noise levels at 1m (maximum).
| Reference | Notes | ||
|---|---|---|---|
|
NBS Code |
90-12-70/460 Solids handling pump unit |
- |
|
SFG20 |
45-07 Sewage or Drainage Pumps Submersible |
- |
Complete this electronic spreadsheet to ensure that your Solids handling pumps product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Requirement
Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.
Purpose of information
To provide a visual representation of proposals, confirming brief for Technical Design stage supporting full spatial coordination.
The above illustration is for Volute casing dry well centrifugal sewage and sludge pumps from the NBS section Water industry pumps. This is indicative of the LOD requirements for Solids handling pumps.
Requirement
Visual information to provide fixed principles of the design supporting procurement. Developed coordination between all professions. Visual representations showing coordination for general size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics. Graphical information represented may alter depending on visual information to be produced, e.g.: Scope of work drawings, setting out, etc. Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To provide a visual representation of proposals at a Technical Design stage supporting full spatial coordination.
The above illustrations are for Volute casing dry well centrifugal sewage and sludge pumps from the NBS section Water industry pumps. This is indicative of the LOD requirements for Solids handling pumps.
Requirement
Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.
The above illustrations are for Volute casing dry well centrifugal sewage and sludge pumps from the NBS section Water industry pumps. This is indicative of the LOD requirements for Solids handling pumps.
Complete this electronic spreadsheet to ensure that your Solids handling pumps product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Solids handling pumps. | |
| Standard | The Standard of the Solids handling pumps. | |
| Pump unit application | The Pump unit application of the Solids handling pumps. | |
| Durability | The Durability of the Solids handling pumps. | |
| Noise levels at 1m (maximum) | The Noise levels at 1m (maximum) of the Solids handling pumps. | |
| Allowable operating speed (maximum) | The Allowable operating speed (maximum) of the Solids handling pumps. | |
| Pump capacity | The Pump capacity of the Solids handling pumps. | |
| Total generated head | The Total generated head of the Solids handling pumps. | |
| Efficiency | The Efficiency of the Solids handling pumps. | |
| Power input | The Power input of the Solids handling pumps. | |
| Maximum diameter of solid sphere to be passed by the pump | The Maximum diameter of solid sphere to be passed by the pump of the Solids handling pumps. | |
| Pump unit vibration (maximum) | The Pump unit vibration (maximum) of the Solids handling pumps. | |
| Orientation | The Orientation of the Solids handling pumps. | |
| Support structure material | The Support structure material of the Solids handling pumps. | |
| Casing | The Casing of the Solids handling pumps. | |
| Casing - Material | The Casing - Material of the Solids handling pumps. | |
| Casing - Flange designation | The Casing - Flange designation of the Solids handling pumps. | |
| Casing - Casing wear rings | The Casing - Casing wear rings of the Solids handling pumps. | |
| Casing - Fixing method | The Casing - Fixing method of the Solids handling pumps. | |
| Impeller | The Impeller of the Solids handling pumps. | |
| Impeller - Impeller type | The Impeller - Impeller type of the Solids handling pumps. | |
| Impeller - Dimensions | The Impeller - Dimensions of the Solids handling pumps. | |
| Impeller - Material | The Impeller - Material of the Solids handling pumps. | |
| Impeller - Method of securing impeller to pump shaft | An example value being Key. | |
| Impeller - Impeller wear rings | The Impeller - Impeller wear rings of the Solids handling pumps. | |
| Impeller - Fixing method | The Impeller - Fixing method of the Solids handling pumps. | |
| Shaft material | The Shaft material of the Solids handling pumps. | |
| Seals | The Seals of the Solids handling pumps. | |
| Seals - Type of seal | The Seals - Type of seal of the Solids handling pumps. | |
| Seals - Manufacturer | The Seals - Manufacturer of the Solids handling pumps. | |
| Seals - Flushing and cooling | The Seals - Flushing and cooling of the Solids handling pumps. | |
| Seals - Flushing water | The Seals - Flushing water of the Solids handling pumps. | |
| Seals - Flushing water - Supply pressure | The Seals - Flushing water - Supply pressure of the Solids handling pumps. | |
| Seals - Flushing water - Flow rate | The Seals - Flushing water - Flow rate of the Solids handling pumps. | |
| Seals - Flushing water - Source | The Seals - Flushing water - Source of the Solids handling pumps. | |
| Shaft coupling | The Shaft coupling of the Solids handling pumps. | |
| Shaft coupling - Shaft coupling type | The Shaft coupling - Shaft coupling type of the Solids handling pumps. | |
| Shaft coupling - Manufacturer | The Shaft coupling - Manufacturer of the Solids handling pumps. | |
| Shaft coupling - Component materials | The Shaft coupling - Component materials of the Solids handling pumps. | |
| Shaft coupling - Component materials - Hub | The Shaft coupling - Component materials - Hub of the Solids handling pumps. | |
| Shaft coupling - Component materials - Spacer | The Shaft coupling - Component materials - Spacer of the Solids handling pumps. | |
| Shaft coupling - Component materials - Flexible component | The Shaft coupling - Component materials - Flexible component of the Solids handling pumps. | |
| Shaft coupling - Component materials - Guard | The Shaft coupling - Component materials - Guard of the Solids handling pumps. | |
| Motor | The Motor of the Solids handling pumps. | |
| Motor - Supply voltage | The Motor - Supply voltage of the Solids handling pumps. | |
| Motor - Nominal frequency | The Motor - Nominal frequency of the Solids handling pumps. | |
| O & M manuals type | An example value being Suppliers standard. |
Provide the information specific to the selected manufacturer and product reference. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Solids handling pumps. | |
| Standard | The Standard of the Solids handling pumps. | |
| Pump unit application | The Pump unit application of the Solids handling pumps. | |
| Durability | The Durability of the Solids handling pumps. | |
| Noise levels at 1m (maximum) | The Noise levels at 1m (maximum) of the Solids handling pumps. | |
| Allowable operating speed (maximum) | The Allowable operating speed (maximum) of the Solids handling pumps. | |
| Pump capacity | The Pump capacity of the Solids handling pumps. | |
| Total generated head | The Total generated head of the Solids handling pumps. | |
| Efficiency | The Efficiency of the Solids handling pumps. | |
| Power input | The Power input of the Solids handling pumps. | |
| Maximum diameter of solid sphere to be passed by the pump | The Maximum diameter of solid sphere to be passed by the pump of the Solids handling pumps. | |
| Pump unit vibration (maximum) | The Pump unit vibration (maximum) of the Solids handling pumps. | |
| Orientation | The Orientation of the Solids handling pumps. | |
| Support structure material | The Support structure material of the Solids handling pumps. | |
| Casing | The Casing of the Solids handling pumps. | |
| Casing - Material | The Casing - Material of the Solids handling pumps. | |
| Casing - Flange designation | The Casing - Flange designation of the Solids handling pumps. | |
| Casing - Casing wear rings | The Casing - Casing wear rings of the Solids handling pumps. | |
| Casing - Fixing method | The Casing - Fixing method of the Solids handling pumps. | |
| Impeller | The Impeller of the Solids handling pumps. | |
| Impeller - Impeller type | The Impeller - Impeller type of the Solids handling pumps. | |
| Impeller - Dimensions | The Impeller - Dimensions of the Solids handling pumps. | |
| Impeller - Material | The Impeller - Material of the Solids handling pumps. | |
| Impeller - Method of securing impeller to pump shaft | An example value being Key. | |
| Impeller - Impeller wear rings | The Impeller - Impeller wear rings of the Solids handling pumps. | |
| Impeller - Fixing method | The Impeller - Fixing method of the Solids handling pumps. | |
| Shaft material | The Shaft material of the Solids handling pumps. | |
| Seals | The Seals of the Solids handling pumps. | |
| Seals - Type of seal | The Seals - Type of seal of the Solids handling pumps. | |
| Seals - Manufacturer | The Seals - Manufacturer of the Solids handling pumps. | |
| Seals - Flushing and cooling | The Seals - Flushing and cooling of the Solids handling pumps. | |
| Seals - Flushing water | The Seals - Flushing water of the Solids handling pumps. | |
| Seals - Flushing water - Supply pressure | The Seals - Flushing water - Supply pressure of the Solids handling pumps. | |
| Seals - Flushing water - Flow rate | The Seals - Flushing water - Flow rate of the Solids handling pumps. | |
| Seals - Flushing water - Source | The Seals - Flushing water - Source of the Solids handling pumps. | |
| Shaft coupling | The Shaft coupling of the Solids handling pumps. | |
| Shaft coupling - Shaft coupling type | The Shaft coupling - Shaft coupling type of the Solids handling pumps. | |
| Shaft coupling - Manufacturer | The Shaft coupling - Manufacturer of the Solids handling pumps. | |
| Shaft coupling - Component materials | The Shaft coupling - Component materials of the Solids handling pumps. | |
| Shaft coupling - Component materials - Hub | The Shaft coupling - Component materials - Hub of the Solids handling pumps. | |
| Shaft coupling - Component materials - Spacer | The Shaft coupling - Component materials - Spacer of the Solids handling pumps. | |
| Shaft coupling - Component materials - Flexible component | The Shaft coupling - Component materials - Flexible component of the Solids handling pumps. | |
| Shaft coupling - Component materials - Guard | The Shaft coupling - Component materials - Guard of the Solids handling pumps. | |
| Motor | The Motor of the Solids handling pumps. | |
| Motor - Supply voltage | The Motor - Supply voltage of the Solids handling pumps. | |
| Motor - Nominal frequency | The Motor - Nominal frequency of the Solids handling pumps. | |
| O & M manuals type | An example value being Suppliers standard. |
Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.
| Name | Definition | |
|---|---|---|
| Accessibility performance | The accessibility issue(s) which the object satisfies. | |
| Asset type | An indication of whether the object is fixed or movable. | |
| Category | A classification code, e.g. Uniclass2015. | |
| Code performance | The code compliance requirement(s) which the object satisfies | |
| Colour | Characteristic or primary colour of product. | |
| Constituents | Optional constituent features, parts or finishes. | |
| Description | A description of the type of object to detail any design intent. | |
| Duration unit | Duration of expected life (typical value is 'years') | |
| Expected life | The typical service life of the object. | |
| Features | Other important characteristics or features relevant to product specification. | |
| Finish | Characteristic or primary finish of product. | |
| Grade | Standard grading which the product corresponds. | |
| Manufacturer | Email address for the organisation responsible for supplying or manufacturing the object | |
| Material | Characteristic or primary material of product. | |
| Model number | The product, item or unit number assigned by the manufacturer of the object. | |
| Model reference | The name of the object as used by the manufacturer. | |
| Name | A unique human-readable alphanumeric name that begins with the product type. | |
| Nominal height | Typically the vertical or secondary characteristic dimension. | |
| Nominal length | Typically the larger or primary horizontal dimension. | |
| Nominal width | Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension. | |
| Replacement cost | An indicative cost for unit replacement. | |
| Shape | Characteristic shape of product. | |
| Size | Characteristic size of product. | |
| Sustainability performance | Description of the sustainability issue(s) which the object satisfies | |
| Warranty description | Description of the warranty content and any exclusions. | |
| Warranty duration (labour) | Duration of labour warranty. | |
| Warranty duration (parts) | Duration of parts warranty. | |
| Warranty duration unit | Duration of warranties (typical value is 'years'). | |
| Warranty guarantor (labour) | Email address for the organisation responsible for the labour warranty. | |
| Warranty guarantor (parts) | Email address for the organisation responsible for the parts warranty. | |
| Asset identifier | The identification assigned to an asset that enables its differentiation from other assets. | |
| Bar code | The identity of the bar code (or rfid) given to an occurrence of the product (per instance). | |
| Installation date | The date that the manufactured item was installed (per instance). | |
| Serial number | The serial number assigned to an occurrence of a product by the manufacturer (per instance). | |
| Tag number | The tag number assigned to an occurrence of a product by the occupier (per instance). | |
| Warranty start date | The date on which the warranty commences. |
