A free resource library for information management across the built environment.
Classification
Uniclass 2015 is a unified classification for the UK industry covering all construction sectors.
Definitions
Over 5,700 construction definitions for level of detail and information.
Product data templates
Standardised templates for manufacturers' product information.
Moving walks are described by characteristics such as standards, angle of inclination and speed. An example use may be within a moving walk system.
| Reference | Notes | ||
|---|---|---|---|
|
NBS Code |
90-80-25/320 Moving walks |
- |
Complete this electronic spreadsheet to ensure that your Moving walks product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Requirement
Graphical representation of element, dimensionally inaccurate.
Purpose of information
To provide a visual indication of proposals at a Concept stage identifying key requirements such as access and maintenance zones etc. Information to be suitable for spatial coordination of primary systems / elements.
The above illustrations are for Escalators from the NBS section Escalator and moving walk products. This is indicative of the LOD requirements for Moving walks .
Requirement
Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.
Purpose of information
To provide a visual representation of proposals, confirming brief for technical Design stage supporting full spatial coordination.
The above illustrations are for Escalators from the NBS section Escalator and moving walk products. This is indicative of the LOD requirements for Moving walks .
Requirement
Visual information to provide fixed principles of the design supporting procurement. Developed coordination between all professions. Visual representations showing coordination for general size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics. Graphical information represented may alter dependant on visual information to be produced, eg: Scope of work drawings, setting out, floor loading etc Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To provide a visual representation of proposals at a Technical Design stage supporting full spatial coordination.
The above illustrations are for Escalators from the NBS section Escalator and moving walk products. This is indicative of the LOD requirements for Moving walks .
Requirement
Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.
Purpose of information
To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.
The above illustrations are for Escalators from the NBS section Escalator and moving walk products. This is indicative of the LOD requirements for Moving walks .
Complete this electronic spreadsheet to ensure that your Moving walks product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide an outline description of the deliverable.
| Name | Definition | |
|---|---|---|
| Description | A description of the type of object to detail any design intent. |
Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Moving walks . | |
| Standard | An example value being To BS EN 115-1. | |
| Angle of inclination | An example value being Horizontal. | |
| Speed | An example value being 0.4 m/s. | |
| Motor efficiency | An example value being To BS EN 60034-30-1, class IE2. | |
| Motor starting method | An example value being Star-delta. | |
| Landing floor plates - Material | An example value being Aluminium alloy. | |
| Landing floor plates - Finish | An example value being Black anodized. | |
| Comb plates - Material | An example value being Aluminium alloy. | |
| Comb plates - Demarcation marking | An example value being Yellow anodized. | |
| Treadway belts - Width (nominal) | An example value being 800 mm. | |
| Treadway belts - Groove width | The Treadway belts - Groove width of the Moving walks . | |
| Treadway belts - Groove depth (minimum) | An example value being 5 mm. | |
| Treadway belts - Web width | The Treadway belts - Web width of the Moving walks . | |
| Treadway pallets - Material | An example value being One-piece, die-cast aluminium. | |
| Treadway pallets - Finish | An example value being Black anodized. | |
| Treadway pallets - Width (nominal) | An example value being 800 mm. | |
| Treadway pallets - Groove width | The Treadway pallets - Groove width of the Moving walks . | |
| Treadway pallets - Groove depth (minimum) | An example value being 10 mm. | |
| Treadway pallets - Web width | The Treadway pallets - Web width of the Moving walks . | |
| Treadway pallets - Step demarcation markers | An example value being Powder coated yellow lines at sides of pallets. | |
| Treadway pallets - Lighting | An example value being Continuous green LEDs under pallets. | |
| Balustrades - Material | An example value being Brushed stainless steel panels. | |
| Balustrades - Height (minimum) | An example value being 900 mm. | |
| Balustrades - Joints | An example value being Sloping to the horizontal. | |
| Balustrades - Balustrade extension distance (minimum) | An example value being 600 mm. | |
| Handrail - Material | An example value being Vulcanized rubber with steel wire reinforcement. | |
| Handrail - Colour | An example value being Beige. | |
| Handrail - Width | An example value being 70 mm. | |
| Handrail - Lighting | An example value being Continuous LED. | |
| Skirting - Material | An example value being Brushed stainless steel with clear anti-friction coating. | |
| Skirting - Brush holder | An example value being Black anodized aluminium. | |
| Skirting - Lighting | An example value being LED spot. | |
| Decking - Material | An example value being Anodized aluminium alloy. | |
| Decking - Width | The Decking - Width of the Moving walks . | |
| Decking - Anti-slide fixtures | The Decking - Anti-slide fixtures of the Moving walks . | |
| Decking - Lighting | An example value being Directional LED. | |
| Cladding material | An example value being Brushed stainless steel panels. | |
| Hand winding device | An example value being Required. |
Provide the information specific to the selected manufacturer and product reference. Information covering the execution of the deliverable should also be provided in the associated specification.
| Name | Definition | |
|---|---|---|
| Manufacturer | The Manufacturer of the Moving walks . | |
| Standard | An example value being To BS EN 115-1. | |
| Angle of inclination | An example value being Horizontal. | |
| Speed | An example value being 0.4 m/s. | |
| Motor efficiency | An example value being To BS EN 60034-30-1, class IE2. | |
| Motor starting method | An example value being Star-delta. | |
| Landing floor plates - Material | An example value being Aluminium alloy. | |
| Landing floor plates - Finish | An example value being Black anodized. | |
| Comb plates - Material | An example value being Aluminium alloy. | |
| Comb plates - Demarcation marking | An example value being Yellow anodized. | |
| Treadway belts - Width (nominal) | An example value being 800 mm. | |
| Treadway belts - Groove width | The Treadway belts - Groove width of the Moving walks . | |
| Treadway belts - Groove depth (minimum) | An example value being 5 mm. | |
| Treadway belts - Web width | The Treadway belts - Web width of the Moving walks . | |
| Treadway pallets - Material | An example value being One-piece, die-cast aluminium. | |
| Treadway pallets - Finish | An example value being Black anodized. | |
| Treadway pallets - Width (nominal) | An example value being 800 mm. | |
| Treadway pallets - Groove width | The Treadway pallets - Groove width of the Moving walks . | |
| Treadway pallets - Groove depth (minimum) | An example value being 10 mm. | |
| Treadway pallets - Web width | The Treadway pallets - Web width of the Moving walks . | |
| Treadway pallets - Step demarcation markers | An example value being Powder coated yellow lines at sides of pallets. | |
| Treadway pallets - Lighting | An example value being Continuous green LEDs under pallets. | |
| Balustrades - Material | An example value being Brushed stainless steel panels. | |
| Balustrades - Height (minimum) | An example value being 900 mm. | |
| Balustrades - Joints | An example value being Sloping to the horizontal. | |
| Balustrades - Balustrade extension distance (minimum) | An example value being 600 mm. | |
| Handrail - Material | An example value being Vulcanized rubber with steel wire reinforcement. | |
| Handrail - Colour | An example value being Beige. | |
| Handrail - Width | An example value being 70 mm. | |
| Handrail - Lighting | An example value being Continuous LED. | |
| Skirting - Material | An example value being Brushed stainless steel with clear anti-friction coating. | |
| Skirting - Brush holder | An example value being Black anodized aluminium. | |
| Skirting - Lighting | An example value being LED spot. | |
| Decking - Material | An example value being Anodized aluminium alloy. | |
| Decking - Width | The Decking - Width of the Moving walks . | |
| Decking - Anti-slide fixtures | The Decking - Anti-slide fixtures of the Moving walks . | |
| Decking - Lighting | An example value being Directional LED. | |
| Cladding material | An example value being Brushed stainless steel panels. | |
| Hand winding device | An example value being Required. |
Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.
| Name | Definition | |
|---|---|---|
| Accessibility performance | The accessibility issue(s) which the object satisfies. | |
| Asset type | An indication of whether the object is fixed or movable. | |
| Category | A classification code, e.g. Uniclass2015. | |
| Code performance | The code compliance requirement(s) which the object satisfies | |
| Colour | Characteristic or primary colour of product. | |
| Constituents | Optional constituent features, parts or finishes. | |
| Description | A description of the type of object to detail any design intent. | |
| Duration unit | Duration of expected life (typical value is 'years') | |
| Expected life | The typical service life of the object. | |
| Features | Other important characteristics or features relevant to product specification. | |
| Finish | Characteristic or primary finish of product. | |
| Grade | Standard grading which the product corresponds. | |
| Manufacturer | Email address for the organisation responsible for supplying or manufacturing the object | |
| Material | Characteristic or primary material of product. | |
| Model number | The product, item or unit number assigned by the manufacturer of the object. | |
| Model reference | The name of the object as used by the manufacturer. | |
| Name | A unique human-readable alphanumeric name that begins with the product type. | |
| Nominal height | Typically the vertical or secondary characteristic dimension. | |
| Nominal length | Typically the larger or primary horizontal dimension. | |
| Nominal width | Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension. | |
| Replacement cost | An indicative cost for unit replacement. | |
| Shape | Characteristic shape of product. | |
| Size | Characteristic size of product. | |
| Sustainability performance | Description of the sustainability issue(s) which the object satisfies | |
| Warranty description | Description of the warranty content and any exclusions. | |
| Warranty duration (labour) | Duration of labour warranty. | |
| Warranty duration (parts) | Duration of parts warranty. | |
| Warranty duration unit | Duration of warranties (typical value is 'years'). | |
| Warranty guarantor (labour) | Email address for the organisation responsible for the labour warranty. | |
| Warranty guarantor (parts) | Email address for the organisation responsible for the parts warranty. | |
| Asset identifier | The identification assigned to an asset that enables its differentiation from other assets. | |
| Bar code | The identity of the bar code (or rfid) given to an occurrence of the product (per instance). | |
| Installation date | The date that the manufactured item was installed (per instance). | |
| Serial number | The serial number assigned to an occurrence of a product by the manufacturer (per instance). | |
| Tag number | The tag number assigned to an occurrence of a product by the occupier (per instance). | |
| Warranty start date | The date on which the warranty commences. |
