Combined emergency luminaires

Combined emergency luminaires are described by characteristics such as standards, photometric performance and supply circuit conductor connections. An example use may be within a hard wired general lighting system.

Uniclass2015 - Pr_70_70_48_16 Combined emergency luminaires
Reference Notes
NBS Code

90-60-50/410 Combined emergency luminaires

-
Download manufacturer object defintion template

Manufacturer Product Data template

Complete this electronic spreadsheet to ensure that your Combined emergency luminaires product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.

2

Requirement

Graphical representation of element, dimensionally inaccurate.

Purpose of information

To provide a visual indication of proposals at a Concept stage identifying key requirements such as access and maintenance zones etc. Information to be suitable for zonal spatial coordination of primary systems / elements.

3

Requirement

Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.

Purpose of information

To provide a visual representation of proposals, confirming brief for technical Design stage supporting full spatial coordination.

4

Requirement

Visual information to provide fixed principles of the design supporting procurement. Developed coordination between all professions. Visual representations showing coordination for general size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics. Graphical information represented may alter dependant on visual information to be produced, eg: Scope of work drawings, setting out, floor loading etc Typical / Installation details separately produced linked to model element and adjacent constructions.

Purpose of information

To provide a visual representation of proposals at a Technical Design stage supporting full spatial coordination.

5

Requirement

Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.

Purpose of information

To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.

Download manufacturer object defintion template

Manufacturer Product Data template

Complete this electronic spreadsheet to ensure that your Combined emergency luminaires product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.

2

Provide an outline description of the deliverable.

Name Definition
Description A description of the type of object to detail any design intent.
3

Provide an outline description of the deliverable.

Name Definition
Description A description of the type of object to detail any design intent.
4

Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.

Name Definition
Third party certification An example value being ENEC .
Ballasts - For fluorescent lamps An example value being To BS EN 60921, BS EN 61347-1 and BS EN 61347-2-8.
Ballasts - For discharge lamps An example value being To BS EN 60923, BS EN 61347-1 and BS EN 61347-2-9.
Lamp starters generally An example value being To BS EN 60927, BS EN 61347-1 and BS EN 61347-2-1.
Electronic control gear - For fluorescent lamps An example value being To BS EN 60929, BS EN 61347-1 and BS EN 61347-2-3.
Electronic control gear - For battery supplied self-contained emergency lighting An example value being To BS EN 61347-1 and BS EN 61347-2-7.
Electronic control gear - For discharge lamps An example value being To BS EN 61347-1 and BS EN 61347-2-12.
Electronic control gear - For LED modules An example value being To BS EN 61347-1 and BS EN 61347-2-13 and BS EN 62384.
Digital addressable control gear - For digital addressable fluorescent lamps An example value being To BS EN 62386-102 and BS EN 62386-201.
Digital addressable control gear - For digital addressable self-contained emergency lighting An example value being To BS EN 62386-102 and BS EN 62386-202.
Digital addressable control gear - For digital addressable high intensity discharge lamps An example value being To BS EN 62386-102 and BS EN 62386-203.
Digital addressable control gear - For digital addressable low voltage halogen lamps An example value being To BS EN 62386-102 and BS EN 62386-204.
Digital addressable control gear - For digital addressable incandescent lamps An example value being To BS EN 62386-102 and BS EN 62386-205.
Digital addressable control gear - For digital addressable LED modules An example value being To BS EN 62386-102 and BS EN 62386-207.
Manufacturer The Manufacturer of the Combined emergency luminaires.
Standards An example value being To BS EN 60598-1 and.
Electric shock classification An example value being To BS EN 60598-1, Class 0.
Photometric performance An example value being To BS EN 13032-1 and BS EN 13032-3.
Supply circuit conductor connections An example value being Screw terminals.
Internal fuse An example value being Required for incoming circuit phase connections.
Input voltage from normal supply An example value being 230 V a.c.
Input voltage from emergency supply An example value being 24 V d.c.
Luminaire power factor An example value being Correct to minimum 0.9 lagging.
Luminaire type The Luminaire type of the Combined emergency luminaires.
Features An example value being Brass bezel.
Ingress protection (minimum) An example value being To BS EN 60529, IP20.
Ballasts CELMA energy efficiency index (minimum) An example value being A1.
Control gear position An example value being Locate components necessary for the operation of the luminaire within the luminaire body.
Indicators - Charging An example value being Green light emitting diodes.
Indicators - Fault An example value being Flashing red light emitting diodes.
Indicators - Position within luminaire An example value being Readily visible. Fix to luminaire body.
Primary lamps - Number An example value being 1.
Primary lamps - Type An example value being Tubular fluorescent lamps.
Secondary lamps - Number An example value being 1.
Secondary lamps - Type An example value being Tubular fluorescent lamps.
Accessories An example value being Hold-off relays.
5

Provide the information specific to the selected manufacturer and product reference. Information covering the execution of the deliverable should also be provided in the associated specification.

Name Definition
Third party certification An example value being ENEC .
Ballasts - For fluorescent lamps An example value being To BS EN 60921, BS EN 61347-1 and BS EN 61347-2-8.
Ballasts - For discharge lamps An example value being To BS EN 60923, BS EN 61347-1 and BS EN 61347-2-9.
Lamp starters generally An example value being To BS EN 60927, BS EN 61347-1 and BS EN 61347-2-1.
Electronic control gear - For fluorescent lamps An example value being To BS EN 60929, BS EN 61347-1 and BS EN 61347-2-3.
Electronic control gear - For battery supplied self-contained emergency lighting An example value being To BS EN 61347-1 and BS EN 61347-2-7.
Electronic control gear - For discharge lamps An example value being To BS EN 61347-1 and BS EN 61347-2-12.
Electronic control gear - For LED modules An example value being To BS EN 61347-1 and BS EN 61347-2-13 and BS EN 62384.
Digital addressable control gear - For digital addressable fluorescent lamps An example value being To BS EN 62386-102 and BS EN 62386-201.
Digital addressable control gear - For digital addressable self-contained emergency lighting An example value being To BS EN 62386-102 and BS EN 62386-202.
Digital addressable control gear - For digital addressable high intensity discharge lamps An example value being To BS EN 62386-102 and BS EN 62386-203.
Digital addressable control gear - For digital addressable low voltage halogen lamps An example value being To BS EN 62386-102 and BS EN 62386-204.
Digital addressable control gear - For digital addressable incandescent lamps An example value being To BS EN 62386-102 and BS EN 62386-205.
Digital addressable control gear - For digital addressable LED modules An example value being To BS EN 62386-102 and BS EN 62386-207.
Manufacturer The Manufacturer of the Combined emergency luminaires.
Standards An example value being To BS EN 60598-1 and.
Electric shock classification An example value being To BS EN 60598-1, Class 0.
Photometric performance An example value being To BS EN 13032-1 and BS EN 13032-3.
Supply circuit conductor connections An example value being Screw terminals.
Internal fuse An example value being Required for incoming circuit phase connections.
Input voltage from normal supply An example value being 230 V a.c.
Input voltage from emergency supply An example value being 24 V d.c.
Luminaire power factor An example value being Correct to minimum 0.9 lagging.
Luminaire type The Luminaire type of the Combined emergency luminaires.
Features An example value being Brass bezel.
Ingress protection (minimum) An example value being To BS EN 60529, IP20.
Ballasts CELMA energy efficiency index (minimum) An example value being A1.
Control gear position An example value being Locate components necessary for the operation of the luminaire within the luminaire body.
Indicators - Charging An example value being Green light emitting diodes.
Indicators - Fault An example value being Flashing red light emitting diodes.
Indicators - Position within luminaire An example value being Readily visible. Fix to luminaire body.
Primary lamps - Number An example value being 1.
Primary lamps - Type An example value being Tubular fluorescent lamps.
Secondary lamps - Number An example value being 1.
Secondary lamps - Type An example value being Tubular fluorescent lamps.
Accessories An example value being Hold-off relays.
6

Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.

Name Definition
Asset type An indication of whether the object is fixed or movable.
Manufacturer Email address for the organisation responsible for supplying or manufacturing the object
ModelNumber The product, item or unit number assigned by the manufacturer of the object.
Warranty guarantor (parts) Email address for the organisation responsible for the parts warranty.
Warranty duration (parts) Duration of parts warranty.
Warranty guarantor (labour) Email address for the organisation responsible for the labour warranty.
Warranty duration (labour) Duration of labour warranty.
Warranty duration unit Duration of warranties (typical value is 'years').
Replacement cost An indicative cost for unit replacement.
Expected life The typical service life of the object.
Duration unit Duration of expected life (typical value is 'years')
Warranty description Description of the warranty content and any exclusions.
Nominal length Typically the larger or primary horizontal dimension.
Nominal width Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension.
Nominal height Typically the vertical or secondary characteristic dimension.
ModelReference The name of the object as used by the manufacturer.
Shape Characteristic shape of product.
Size Characteristic size of product.
Colour Characteristic or primary colour of product.
Finish Characteristic or primary finish of product.
Grade Standard grading which the product corresponds.
Material Characteristic or primary material of product.
Constituents Optional constituent features, parts or finishes.
Features Other important characteristics or features relevant to product specification.
Accessibility performance The accessibility issue(s) which the object satisfies.
Sustainability performance Description of the sustainability issue(s) which the object satisfies
Code performance The code compliance requirement(s) which the object satisfies
Serial number The serial number assigned to an occurrence of a product by the manufacturer (per instance).
Installation date The date that the manufactured item was installed (per instance).
Warranty start date The date on which the warranty commences.
Tag number The tag number assigned to an occurrence of a product by the occupier (per instance).
Bar code The identity of the bar code (or rfid) given to an occurrence of the product (per instance).
Asset identifier The identification assigned to an asset that enables its differentiation from other assets.