Provide enough information to allow the selection of the manufacturer product to meet requirements. This information may also be used to replace the installed product during the operation stage of the building's lifecycle. Information covering the execution of the deliverable should also be provided in the associated specification.
Name |
Definition |
|
Manufacturer |
The Manufacturer of the Emergency luminaires. |
|
Standards |
An example value being To BS EN 60598-1,. |
|
Third-party certification |
An example value being ENEC
mark. |
|
Luminaire description |
The Luminaire description of the Emergency luminaires. |
|
Classification - Electric shock |
An example value being To BS EN 60598-1, Class I. |
|
Classification - Ingress protection (minimum) |
An example value being To BS EN 60529, IP20. |
|
Classification - Suitability for direct mounting on normally flammable surfaces |
An example value being Suitable for direct mounting on normally flammable surfaces. |
|
Classification - Circumstances of use |
An example value being Normal. |
|
Classification - Type |
An example value being X. |
|
Classification - Mode of operation |
An example value being 0. |
|
Classification - Facilities |
An example value being A. |
|
Classification - Duration of emergency mode (minimum) |
An example value being 10. |
|
Rated maximum ambient temperature |
The Rated maximum ambient temperature of the Emergency luminaires. |
|
Impact protection (minimum) |
An example value being IK02. |
|
Luminaire performance |
An example value being To BS EN 62722-1 and BS EN 13032-1. |
|
Controlgear position |
An example value being Integral within luminaire. |
|
Supply circuit conductor connections |
An example value being Screw terminals. |
|
Internal fuse |
An example value being Required for incoming circuit phase connections. |
|
Nominal voltage |
An example value being 24 V d.c. |
|
Luminaire power factor |
An example value being Correct to minimum 0.9 lagging. |
|
LED luminaires - Performance standards |
An example value being To BS EN 62717 and BS EN 62722-2-1. |
|
LED luminaires - Safety standard |
An example value being To BS EN IEC 62031. |
|
LED luminaires - Initial LED luminaire efficacy (minimum) |
The LED luminaires - Initial LED luminaire efficacy (minimum) of the Emergency luminaires. |
|
LED luminaires - Wattage |
The LED luminaires - Wattage of the Emergency luminaires. |
|
LED luminaires - Colour temperature |
An example value being 3000 K. |
|
LED luminaires - Colour rendering index (Ra) |
An example value being >90. |
|
LED luminaires - Beam angle |
An example value being 38°. |
|
LED luminaires - Useful life |
The LED luminaires - Useful life of the Emergency luminaires. |
|
Non-LED luminaires - Ballasts' CELMA energy efficiency index (minimum) |
An example value being A1. |
|
Non-LED luminaires - Number of lamps |
An example value being 1. |
|
Non-LED luminaires - Lamp properties - Wattage |
The Non-LED luminaires - Lamp properties - Wattage of the Emergency luminaires. |
|
Non-LED luminaires - Lamp properties - Colour temperature |
An example value being 3000 K. |
|
Non-LED luminaires - Lamp properties - Colour rendering index (Ra) |
An example value being >90. |
|
Non-LED luminaires - Lamp properties - Beam angle |
An example value being 38°. |
|
Non-LED luminaires - Lamp properties - Initial lumens (minimum) |
The Non-LED luminaires - Lamp properties - Initial lumens (minimum) of the Emergency luminaires. |
|
Graphical symbol format |
An example value being European format sign, running man, arrow left. |
|
Accessories |
An example value being Brushed brass bezel. |
|