Concrete pavement glazing smoke venting systems

A cast in situ glazed smoke venting system typically comprises of items such as pre-construction survey, type of panel and panel bedding.

Uniclass2015 - Ss_30_34_16_15 Concrete pavement glazing smoke venting systems
Reference Notes
NBS Code

20-40-60/115 Cast in situ glazed smoke venting system

-
NRM1

8.2.1 Roads, paths and pavings (default)

Rules of measurement | Cost benchmarks

2.3.1 Roof structure

Rules of measurement | Cost benchmarks

2.2.2 Balconies

Rules of measurement | Cost benchmarks

2.2.1 Floors

Rules of measurement | Cost benchmarks

-
Download manufacturer object defintion template

Manufacturer Product Data template

Complete this electronic spreadsheet to ensure that your Concrete pavement glazing smoke venting systems product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.

2

Requirement

Graphical representation of the system equipment with approximate layout size, shape based upon an actual product selection and also approximate location to be defined within the model. Approximate amount of service connections required and approximate sizes / location. Approximate requirement for access and maintenance allowed for based upon actual components.

Purpose of information

To provide a visual representation of proposals at a Design Development stage and general spatial coordination.

Plan

The above illustration is for In situ concrete roof glazing systems from the NBS section Precast glazing and venting systems. This is indicative of the LOD requirements for Concrete pavement glazing smoke venting systems.

3

Requirement

Graphical representation of the equipment with actual size, shape and location. Actual location of pipework, ductwork and electrical connections defined, including all supports. Actual requirement for access and maintenance allowed for.

Purpose of information

To provide a visual representation of proposals at a technical Design stage supporting full spatial coordination.

Plan
Model
2D Detail

The above illustrations are for In situ concrete roof glazing systems from the NBS section Precast glazing and venting systems. This is indicative of the LOD requirements for Concrete pavement glazing smoke venting systems.

4

Requirement

Information to be updated to reflect 'Final Construction Issue'. All supports and joint details anchors, supports & anti-vibration mounts to be modelled.

Purpose of information

To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.

Elevation
Model
2D Detail

The above illustrations are for In situ concrete roof glazing systems from the NBS section Precast glazing and venting systems. This is indicative of the LOD requirements for Concrete pavement glazing smoke venting systems.

5

Requirement

Information to be updated to reflect 'Final Construction Issue'. All anchors, supports & anti-vibration mounts to be modelled.>

Purpose of information

To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.

Plan
Elevation
Model

The above illustrations are for In situ concrete roof glazing systems from the NBS section Precast glazing and venting systems. This is indicative of the LOD requirements for Concrete pavement glazing smoke venting systems.

Download manufacturer object defintion template

Manufacturer Product Data template

Complete this electronic spreadsheet to ensure that your Concrete pavement glazing smoke venting systems product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.

2

Provide an outline description of the deliverable.

Name Definition
Description A description of the type of object to detail any design intent.
3

Provide information relevant to the specific performance of the deliverable. Information to specify the completion (cleaning, testing, spares, training...) of the deliverable should also be provided in the associated specification.

Name Definition
Compliance with performance requirements Requirement, Method and Testing authority.
Structural performance of panels Load capacity (minimum).
Fire resistance of panels Standard and Requirement (minimum).
Thermal transmittance of panels U-value (maximum).
4

Provide information relevant to the specific child products of the deliverable to allow suitable products from manufacturers to be selected. Information covering the completion and execution of the deliverable and its child products should also be provided.

Name Definition
Pre-construction survey The Pre-construction survey of the Concrete pavement glazing smoke venting systems.
Type of panel The Type of panel of the Concrete pavement glazing smoke venting systems.
Panel bedding Products such as Bitumen-based damp-proof courses and cavity trays.
Perimeter movement joints - Filler Products such as Bitumen-impregnated softboard joint fillers.
Perimeter movement joints - Bond breaker barrier Products such as Polyethylene (PE) debonding tapes.
Perimeter movement joints - Sealant Products such as Hot-applied bituminous joint sealants.
5

Provide information relevant to the specific child products of the deliverable to allow for purchasing. Information covering the completion and execution of the deliverable and its child products should also be provided.

Name Definition
Pre-construction survey The Pre-construction survey of the Concrete pavement glazing smoke venting systems.
Type of panel The Type of panel of the Concrete pavement glazing smoke venting systems.
Panel bedding Products such as Bitumen-based damp-proof courses and cavity trays.
Perimeter movement joints - Filler Products such as Bitumen-impregnated softboard joint fillers.
Perimeter movement joints - Bond breaker barrier Products such as Polyethylene (PE) debonding tapes.
Perimeter movement joints - Sealant Products such as Hot-applied bituminous joint sealants.
6

Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.

Name Definition
Asset type An indication of whether the object is fixed or movable.
Manufacturer Email address for the organisation responsible for supplying or manufacturing the object
ModelNumber The product, item or unit number assigned by the manufacturer of the object.
Warranty guarantor (parts) Email address for the organisation responsible for the parts warranty.
Warranty duration (parts) Duration of parts warranty.
Warranty guarantor (labour) Email address for the organisation responsible for the labour warranty.
Warranty duration (labour) Duration of labour warranty.
Warranty duration unit Duration of warranties (typical value is 'years').
Replacement cost An indicative cost for unit replacement.
Expected life The typical service life of the object.
Duration unit Duration of expected life (typical value is 'years')
Warranty description Description of the warranty content and any exclusions.
Nominal length Typically the larger or primary horizontal dimension.
Nominal width Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension.
Nominal height Typically the vertical or secondary characteristic dimension.
ModelReference The name of the object as used by the manufacturer.
Shape Characteristic shape of product.
Size Characteristic size of product.
Colour Characteristic or primary colour of product.
Finish Characteristic or primary finish of product.
Grade Standard grading which the product corresponds.
Material Characteristic or primary material of product.
Constituents Optional constituent features, parts or finishes.
Features Other important characteristics or features relevant to product specification.
Accessibility performance The accessibility issue(s) which the object satisfies.
Sustainability performance Description of the sustainability issue(s) which the object satisfies
Code performance The code compliance requirement(s) which the object satisfies
Serial number The serial number assigned to an occurrence of a product by the manufacturer (per instance).
Installation date The date that the manufactured item was installed (per instance).
Warranty start date The date on which the warranty commences.
Tag number The tag number assigned to an occurrence of a product by the occupier (per instance).
Bar code The identity of the bar code (or rfid) given to an occurrence of the product (per instance).
Asset identifier The identification assigned to an asset that enables its differentiation from other assets.