Intruder detection and alarm systems

An intruder detection and alarm system typically comprises of items such as power supply, detectors and cabling and containment.

Uniclass2015 - Ss_75_40_75_40 Intruder detection and alarm systems
Reference Notes
NBS Code

75-60-40/110 Intrusion and hold-up alarm system

-
NRM1

5.12.2 Security systems (default)

Rules of measurement | Cost benchmarks

-
Download manufacturer object defintion template

Manufacturer Product Data template

Complete this electronic spreadsheet to ensure that your Intruder detection and alarm systems product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.

2

Requirement

Graphical representation of element, dimensionally inaccurate.

Purpose of information

To provide a visual indication of proposals at a Concept stage identifying key requirements such as access and maintenance zones etc. Information to be suitable for zonal spatial coordination of primary systems / elements.

3

Requirement

Visual information to provide developed principles of the design to a greater level of detail. Developed coordination between all professions. Visual development showing coordination for general size and primary relationships between different elements of the construction. Can form a brief for a specialist sub-contractor or fabricator to progress with their technical design, fabrication and installation. This would be expected to include critical dimensional coordination, performance requirements and qualities of finish.

Purpose of information

To provide a visual representation of proposals, confirming brief for technical Design stage supporting full spatial coordination.

4

Requirement

Visual information to provide fixed principles of the design supporting procurement. Developed coordination between all professions. Visual representations showing coordination for general size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics. Graphical information represented may alter dependant on visual information to be produced, eg: Scope of work drawings, setting out, floor loading etc Typical / Installation details separately produced linked to model element and adjacent constructions.

Purpose of information

To provide a visual representation of proposals at a Technical Design stage supporting full spatial coordination.

5

Requirement

Visual information to provide full information to support construction / installation. Developed coordination between all professions. Visual representations showing final coordination for size and relationships between different elements of the construction. Graphical representation of system, dimensionally accurate indicating primary performance characteristics and sufficient information to support installation. Typical / Installation details separately produced linked to model element and adjacent constructions.

Purpose of information

To be updated during the construction process to reflect the final design, and to provide a future reference to sit alongside the O&M Manuals.

Download manufacturer object defintion template

Manufacturer Product Data template

Complete this electronic spreadsheet to ensure that your Intruder detection and alarm systems product information meets the requirements of Level 2 BIM. This is important as it will enable your customers to select, specify and use your products within the BIM environment. Once you have completed this template you can host it on your own website or distribute it to your customers. Please note that we do not host completed product data templates within the BIM Toolkit.

3

Provide information relevant to the specific performance of the deliverable. Information to specify the completion (cleaning, testing, spares, training...) of the deliverable should also be provided in the associated specification.

Name Definition
Design of intrusion and hold-up alarm systems Design, Standard and Security grading.
System setting and unsetting Design the system to accommodate the following entry and exit routes.
Protected area, zoning and device identification Areas to be protected, Perimeter protection and Zoning.
Spare capacity Spare capacity (minimum).
Connection to fire detection and alarm systems Fire and fault signal.
Integration with CCTV systems Integration.
Continuous monitoring Objective and Continuous monitoring.
Integration with other alarm and security systems Objectives and Systems to be integrated.
Prevention of setting for grade 1 systems Conditions preventing system setting.
Prevention of setting for grade 2 systems Conditions preventing system setting.
Prevention of setting for grade 3 systems Conditions preventing system setting.
Supplementary processing of signals for grade 1 systems System status, set and System status, unset.
Supplementary processing of signals for grade 2 systems System status, set and System status, unset.
Supplementary processing of signals for grade 3 or 4 systems System status, set and System status, unset.
Supplementary indications available to access level 1 users During setting and During unsetting.
Supplementary indications available to access level 2, 3 and 4 users System set, During setting and During unsetting.
Notification requirements Means of notification.
Supplementary tamper detection Tamper detection of hold-up devices, Tamper detection of detectors and sensors and Tamper detection of junction boxes.
Monitoring of signals and substitution of system components in grade 1, 2 and 3 systems Substitution of system components and Delay, modification, substitution or loss of signals or messages.
Event recording for grade 1 systems Endurance of memory after system power failure (minimum) and Event recording functions.
Event recording for grade 2 systems Event recording functions.
Event recording for grade 3 systems Event recording functions.
Event recording for grade 4 systems Event recording functions.
4

Provide information relevant to the specific child products of the deliverable to allow suitable products from manufacturers to be selected. Information covering the completion and execution of the deliverable and its child products should also be provided.

Name Definition
System manufacturer The System manufacturer of the Intruder detection and alarm systems.
Control and indicating equipment (CIE) Products such as Intruder alarm panels.
Notification equipment Products such as External intruder alarm sounders.
Detectors Products such as Acoustic detectors.
Cable type Products such as Multicore alarm cables.
Containment Products such as Cable baskets.
Containment accessories Products such as Conduit fittings.
Rewireable installation The Rewireable installation of the Intruder detection and alarm systems.
Concealed installation The Concealed installation of the Intruder detection and alarm systems.
5

Provide information relevant to the specific child products of the deliverable to allow for purchasing. Information covering the completion and execution of the deliverable and its child products should also be provided.

Name Definition
System manufacturer The System manufacturer of the Intruder detection and alarm systems.
Control and indicating equipment (CIE) Products such as Intruder alarm panels.
Notification equipment Products such as External intruder alarm sounders.
Detectors Products such as Acoustic detectors.
Cable type Products such as Multicore alarm cables.
Containment Products such as Cable baskets.
Containment accessories Products such as Conduit fittings.
Rewireable installation The Rewireable installation of the Intruder detection and alarm systems.
Concealed installation The Concealed installation of the Intruder detection and alarm systems.
6

Provide the information specific to the installed deliverable that is required for operation and maintenance. Information covering the detailed maintenance should also be provided in the associated PDF manuals.

Name Definition
Asset type An indication of whether the object is fixed or movable.
Manufacturer Email address for the organisation responsible for supplying or manufacturing the object
ModelNumber The product, item or unit number assigned by the manufacturer of the object.
Warranty guarantor (parts) Email address for the organisation responsible for the parts warranty.
Warranty duration (parts) Duration of parts warranty.
Warranty guarantor (labour) Email address for the organisation responsible for the labour warranty.
Warranty duration (labour) Duration of labour warranty.
Warranty duration unit Duration of warranties (typical value is 'years').
Replacement cost An indicative cost for unit replacement.
Expected life The typical service life of the object.
Duration unit Duration of expected life (typical value is 'years')
Warranty description Description of the warranty content and any exclusions.
Nominal length Typically the larger or primary horizontal dimension.
Nominal width Nominal width of product, typically the characteristic or secondary horizontal or characteristic dimension.
Nominal height Typically the vertical or secondary characteristic dimension.
ModelReference The name of the object as used by the manufacturer.
Shape Characteristic shape of product.
Size Characteristic size of product.
Colour Characteristic or primary colour of product.
Finish Characteristic or primary finish of product.
Grade Standard grading which the product corresponds.
Material Characteristic or primary material of product.
Constituents Optional constituent features, parts or finishes.
Features Other important characteristics or features relevant to product specification.
Accessibility performance The accessibility issue(s) which the object satisfies.
Sustainability performance Description of the sustainability issue(s) which the object satisfies
Code performance The code compliance requirement(s) which the object satisfies
Serial number The serial number assigned to an occurrence of a product by the manufacturer (per instance).
Installation date The date that the manufactured item was installed (per instance).
Warranty start date The date on which the warranty commences.
Tag number The tag number assigned to an occurrence of a product by the occupier (per instance).
Bar code The identity of the bar code (or rfid) given to an occurrence of the product (per instance).
Asset identifier The identification assigned to an asset that enables its differentiation from other assets.